Susceptibility to overheating and optimization of furnace heating parameters in heat treatment of rolled products and tubes of carbon- and low-alloy steels

New practice for heat treatment of hypereutectoid steel rolls

Malinochka, Y.
Litvinenko, P.
Naumenko, V.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Stal' 1989 (5) p. 72-74)Available from British Library Document Supply Cent...

Procedure for calculating decarburisation and scaling during hot rolling of carbon steels

Zhadan, V.T.
Breigin, V.D.
Trusov, V.A.
Oratovskaya, I.E.
Chichaev, A.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (11) p. 77-81)Availa...

Effect of composition and heat treatment on the corrosion cracking resistance of austenitic Cr-Mn-C steels

Nemirovskii, Yu.R.
Nemirovskii, M.R
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

16.00; Translated from Russian (Term. Obrab., Struktura Svoistva Met. 1986 (11) p. 11-16)SIGLEAvaila...

Optimization of heat treatment of steels

Matyas, M.
Husarik, M.
Hyspecka, L.
Mazanec, K
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1984

12.00; Translated from Russian (Sb. Ved. Pr. Vys. Sk. Banske Ostrave 1982 v. 28(1) p. 11-20)SIGLEAva...

Effect of the structural state of steels on heat resistance

Bannykh, O.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

20.00; Translated from Russian (Zharoprochnye Zharostoikie Metallicheskie Materialy 1987 p. 5-14 )SI...

Optimization of hot rolling conditions for H18N9T grade corrosion resistant austenitic steels

Zidek, M.
Liska, M
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Polish (Hutnik (Katowice) 1987 v. 54(3) p. 77-80)Available from British Libra...

Influence of heating rate on dependence of primary austenite grain size on initial microstructure of steel

Morozov, O.P.
Popova, T.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (4) p. 54-58)SIGLEAv...

Optimizing steelmaking practices in open-hearth furnaces

Mikhnevich, V.F
Yargin, S.A.
Plepler, M.L.
Zakharov, N.I.
Blashchuk, N.M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Stal' 1986 (8) p. 27-29)Available from British Library Document Supp...

Hot deformation resistance of low-alloy steel 08GSYuF

Khizhnyak, D.D.
Pritomanova, M.I.
Malik, I.V.
Kolesnichenko, B.P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

15.00; Translated from Russian (Stal' 1986 (6) p. 83-86)SIGLEAvailable from British Library Document...

Thermal properties of 0Kh18F2T1 steel

Serebrennikov, N.
Pletneva, E.
Kapustkin, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1989 (6) p. 85-86)SIGLEAvailable...

Influence of composition and heat treatment on mechanical properties of railway wheel steel

Zaitsev, V.N.
Ozimina, V.V.
Bashkirov, V.A.
Staroseletskii, M.I.
Florov, V.K.
Basova, G.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 90-93)SIGLEAv...

Influence of heat treatment on structure of weld-cladding steel with carbide-metallic hardening

Safonov, E.N.
Pryakhin, A.V.
Khadyev, M.S.
Osminkin, V.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (5) p. 97-100)SIGLEA...

Effect of heat treatment on structural stability and mechanical properties of ferritic-austenitic steels

Bannykh, O.A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1985

13.00; Translated from Russian (Zharoprochnye i Zharostoikie Stal. Splav. Nik. Os. 1984 p. 46-52)Ava...

Parameters of the hot cracking resistance of the heat-affected zone of welded joints in steels

Palatin, Y.
Tsvetkov, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Report of the E.O. Paton Electric Welding Institute, Kiev, 2000)Available f...

Improvement of thermal processes in production of rolled products of ferrous metals

Shichkov, A.N.
Tishkov, V.Ya
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (9) p. 100-103)SIGLEAvailable from British Library Document Supp...

New practice for heat treatment of hypereutectoid steel rolls

Malinochka, Y.
Litvinenko, P.
Naumenko, V.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Stal' 1989 (5) p. 72-74)Available from British Library Document Supply Cent...

Procedure for calculating decarburisation and scaling during hot rolling of carbon steels

Zhadan, V.T.
Breigin, V.D.
Trusov, V.A.
Oratovskaya, I.E.
Chichaev, A.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (11) p. 77-81)Availa...

Effect of composition and heat treatment on the corrosion cracking resistance of austenitic Cr-Mn-C steels

Nemirovskii, Yu.R.
Nemirovskii, M.R
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

16.00; Translated from Russian (Term. Obrab., Struktura Svoistva Met. 1986 (11) p. 11-16)SIGLEAvaila...

Optimization of heat treatment of steels

Matyas, M.
Husarik, M.
Hyspecka, L.
Mazanec, K
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1984

12.00; Translated from Russian (Sb. Ved. Pr. Vys. Sk. Banske Ostrave 1982 v. 28(1) p. 11-20)SIGLEAva...

Effect of the structural state of steels on heat resistance

Bannykh, O.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

20.00; Translated from Russian (Zharoprochnye Zharostoikie Metallicheskie Materialy 1987 p. 5-14 )SI...

Optimization of hot rolling conditions for H18N9T grade corrosion resistant austenitic steels

Zidek, M.
Liska, M
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Polish (Hutnik (Katowice) 1987 v. 54(3) p. 77-80)Available from British Libra...

Influence of heating rate on dependence of primary austenite grain size on initial microstructure of steel

Morozov, O.P.
Popova, T.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (4) p. 54-58)SIGLEAv...

Optimizing steelmaking practices in open-hearth furnaces

Mikhnevich, V.F
Yargin, S.A.
Plepler, M.L.
Zakharov, N.I.
Blashchuk, N.M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Stal' 1986 (8) p. 27-29)Available from British Library Document Supp...

Hot deformation resistance of low-alloy steel 08GSYuF

Khizhnyak, D.D.
Pritomanova, M.I.
Malik, I.V.
Kolesnichenko, B.P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

15.00; Translated from Russian (Stal' 1986 (6) p. 83-86)SIGLEAvailable from British Library Document...

Thermal properties of 0Kh18F2T1 steel

Serebrennikov, N.
Pletneva, E.
Kapustkin, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1989 (6) p. 85-86)SIGLEAvailable...

Influence of composition and heat treatment on mechanical properties of railway wheel steel

Zaitsev, V.N.
Ozimina, V.V.
Bashkirov, V.A.
Staroseletskii, M.I.
Florov, V.K.
Basova, G.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 90-93)SIGLEAv...

Influence of heat treatment on structure of weld-cladding steel with carbide-metallic hardening

Safonov, E.N.
Pryakhin, A.V.
Khadyev, M.S.
Osminkin, V.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (5) p. 97-100)SIGLEA...

Effect of heat treatment on structural stability and mechanical properties of ferritic-austenitic steels

Bannykh, O.A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1985

13.00; Translated from Russian (Zharoprochnye i Zharostoikie Stal. Splav. Nik. Os. 1984 p. 46-52)Ava...

Parameters of the hot cracking resistance of the heat-affected zone of welded joints in steels

Palatin, Y.
Tsvetkov, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Report of the E.O. Paton Electric Welding Institute, Kiev, 2000)Available f...

Improvement of thermal processes in production of rolled products of ferrous metals

Shichkov, A.N.
Tishkov, V.Ya
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (9) p. 100-103)SIGLEAvailable from British Library Document Supp...

New practice for heat treatment of hypereutectoid steel rolls

Malinochka, Y.
Litvinenko, P.
Naumenko, V.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Stal' 1989 (5) p. 72-74)Available from British Library Document Supply Cent...

Procedure for calculating decarburisation and scaling during hot rolling of carbon steels

Zhadan, V.T.
Breigin, V.D.
Trusov, V.A.
Oratovskaya, I.E.
Chichaev, A.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (11) p. 77-81)Availa...

Effect of composition and heat treatment on the corrosion cracking resistance of austenitic Cr-Mn-C steels

Nemirovskii, Yu.R.
Nemirovskii, M.R
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

16.00; Translated from Russian (Term. Obrab., Struktura Svoistva Met. 1986 (11) p. 11-16)SIGLEAvaila...

Susceptibility to overheating and optimization of furnace heating parameters in heat treatment of rolled products and tubes of carbon- and low-alloy steels

Abstract

Extracted data

Susceptibility to overheating and optimization of furnace heating parameters in heat treatment of rolled products and tubes of carbon- and low-alloy steels

Abstract

Extracted data

Related items

Related items