Manual on connections Volume 1 - joints in simple construction, conforming with the requirements of BS5950: Part 1: 1985

Selecting gaskets for construction joints

Newman, C.
Building Research Establishment, Watford (United Kingdom)

January 2002

Produced with the Department of Trade and Industry (GB)Available from British Library Document Suppl...

Joints in carbon fibre reinforced composites

Smith, P.A.
Pascoe, K.J
Cambridge Univ. (United Kingdom). Dept. of Engineering

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:9106.17(CUED/C-MAT/TR--130) / BLDSC ...

Technical specification for: insulation joints Part 1 - joints equal to or greater than 80 mm nominal size operating at pressures greater than 7 bar for class ratings 150, 300 and 600

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as E17/E: part 1 based on specification E17: part 1 - January 1994Available from Bri...

Joints in simple construction volume 1 Design methods

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd. (BCSA), London (United Kingdom)

January 1991

SIGLEAvailable from British Library Document Supply Centre- DSC:8127.922(SCI-P--105) / BLDSC - Briti...

Joints in steel construction Simple connections

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd., London (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:8127.922(212) / BLDSC - British Libra...

Joints in steel construction Momemt connections

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd., London (United Kingdom)

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:8127.922(SCI-Pub--207/95) / BLDSC - B...

Manual on connections for beam and column construction Conforming with the requirements of BS449: part 2 1969

British Constructional Steelwork Association Ltd., London
Pask, J.W.

January 1982

SIGLELD:7033(BCSA-P--9/82) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Design and construction of joints in concrete structures

Bussell, M.
Cather, R
Construction Industry Research and Information Association (CIRIA), London (United Kingdom)

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:7411.112(CIRIA--146) / BLDSC - Britis...

Connections An impartial design and specifying guide to furniture assembly fittings

Alchemede Product Development Ltd., Bath (United Kingdom)

January 1984

60.00SIGLEAvailable from British Library Document Supply Centre- DSC:86/14825(Connections) / BLDSC -...

Design examples J Joints

Timber Research and Development Association, High Wycombe (United Kingdom)

January 1994

BS DD-ENV-1995 Part 1.1SIGLEAvailable from British Library Document Supply Centre-DSC:3829.264410(5)...

Practical guide to the use of bridge expansion joints

Barnard, C.
Cuninghame, J.
Transport Research Lab., Crowthorne (United Kingdom)
Highways Agency, London (United Kingdom)

January 1997

Describes work commissioned by the Bridges Engineering Div. of the Highways Agency (GB) under E548B/...

The design of structural adhesive joints

Bigwood, D.A

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX92233 / BLDSC - British Library Do...

Pipe joints A state of the art review; part 2: non-metallic pipe joints

Institution of Mechanical Engineers, London (United Kingdom)

January 1985

I. Mech. E. Guides for the Process IndustriesAvailable from British Library Lending Division - LD:85...

Expansion joints for use in highway bridge decks

Innes, J
Scottish Development Dept., Edinburgh (United Kingdom). Roads Directorate

January 1990

2.00Available from British Library Document Supply Centre- DSC:8670.232(SDD-TM-SB--2/90) / BLDSC - B...

The inclusion of flexible joints in the stiffness method

Al-Hammoud, A.
Sharman, P.W
Loughborough Univ. of Technology (United Kingdom). Dept. of Transport Technology

January 1984

SIGLEAvailable from British Library Document Supply Centre- DSC:5294.94(LUT-TT--8401) / BLDSC - Brit...

Selecting gaskets for construction joints

Newman, C.
Building Research Establishment, Watford (United Kingdom)

January 2002

Produced with the Department of Trade and Industry (GB)Available from British Library Document Suppl...

Joints in carbon fibre reinforced composites

Smith, P.A.
Pascoe, K.J
Cambridge Univ. (United Kingdom). Dept. of Engineering

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:9106.17(CUED/C-MAT/TR--130) / BLDSC ...

Technical specification for: insulation joints Part 1 - joints equal to or greater than 80 mm nominal size operating at pressures greater than 7 bar for class ratings 150, 300 and 600

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as E17/E: part 1 based on specification E17: part 1 - January 1994Available from Bri...

Joints in simple construction volume 1 Design methods

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd. (BCSA), London (United Kingdom)

January 1991

SIGLEAvailable from British Library Document Supply Centre- DSC:8127.922(SCI-P--105) / BLDSC - Briti...

Joints in steel construction Simple connections

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd., London (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:8127.922(212) / BLDSC - British Libra...

Joints in steel construction Momemt connections

Steel Construction Inst., Ascot (United Kingdom)
British Constructional Steelwork Association Ltd., London (United Kingdom)

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:8127.922(SCI-Pub--207/95) / BLDSC - B...

Manual on connections for beam and column construction Conforming with the requirements of BS449: part 2 1969

British Constructional Steelwork Association Ltd., London
Pask, J.W.

January 1982

SIGLELD:7033(BCSA-P--9/82) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Design and construction of joints in concrete structures

Bussell, M.
Cather, R
Construction Industry Research and Information Association (CIRIA), London (United Kingdom)

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:7411.112(CIRIA--146) / BLDSC - Britis...

Connections An impartial design and specifying guide to furniture assembly fittings

Alchemede Product Development Ltd., Bath (United Kingdom)

January 1984

60.00SIGLEAvailable from British Library Document Supply Centre- DSC:86/14825(Connections) / BLDSC -...

Design examples J Joints

Timber Research and Development Association, High Wycombe (United Kingdom)

January 1994

BS DD-ENV-1995 Part 1.1SIGLEAvailable from British Library Document Supply Centre-DSC:3829.264410(5)...

Practical guide to the use of bridge expansion joints

Barnard, C.
Cuninghame, J.
Transport Research Lab., Crowthorne (United Kingdom)
Highways Agency, London (United Kingdom)

January 1997

Describes work commissioned by the Bridges Engineering Div. of the Highways Agency (GB) under E548B/...

The design of structural adhesive joints

Bigwood, D.A

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX92233 / BLDSC - British Library Do...

Pipe joints A state of the art review; part 2: non-metallic pipe joints

Institution of Mechanical Engineers, London (United Kingdom)

January 1985

I. Mech. E. Guides for the Process IndustriesAvailable from British Library Lending Division - LD:85...

Expansion joints for use in highway bridge decks

Innes, J
Scottish Development Dept., Edinburgh (United Kingdom). Roads Directorate

January 1990

2.00Available from British Library Document Supply Centre- DSC:8670.232(SDD-TM-SB--2/90) / BLDSC - B...

The inclusion of flexible joints in the stiffness method

Al-Hammoud, A.
Sharman, P.W
Loughborough Univ. of Technology (United Kingdom). Dept. of Transport Technology

January 1984

SIGLEAvailable from British Library Document Supply Centre- DSC:5294.94(LUT-TT--8401) / BLDSC - Brit...

Selecting gaskets for construction joints

Newman, C.
Building Research Establishment, Watford (United Kingdom)

January 2002

Produced with the Department of Trade and Industry (GB)Available from British Library Document Suppl...

Joints in carbon fibre reinforced composites

Smith, P.A.
Pascoe, K.J
Cambridge Univ. (United Kingdom). Dept. of Engineering

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:9106.17(CUED/C-MAT/TR--130) / BLDSC ...

Technical specification for: insulation joints Part 1 - joints equal to or greater than 80 mm nominal size operating at pressures greater than 7 bar for class ratings 150, 300 and 600

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as E17/E: part 1 based on specification E17: part 1 - January 1994Available from Bri...

Manual on connections Volume 1 - joints in simple construction, conforming with the requirements of BS5950: Part 1: 1985

Abstract

Extracted data

Manual on connections Volume 1 - joints in simple construction, conforming with the requirements of BS5950: Part 1: 1985

Abstract

Extracted data

Related items

Related items