A proposed failure criterion for tough adhesives

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

On the probability of failure of components that fail in a brittle manner

Stanley, P.
UKAEA, Warrington. Safety and Reliability Directorate

LD:9091.9F(ART--8) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Site-applied adhesives Failures and how to avoid them

Rosaman, D
Coad, J.R.
Building Research Establishment (BRE), Watford (United Kingdom)

January 1986

Available from British Library Document Supply Centre- DSC:2277.48(BRE-IP--12/86) / BLDSC - British ...

A failure criterion for fillet welds

Higgs, J

January 1981

SIGLEAvailable from British Library Document Supply Centre- DSC:D36951/81 / BLDSC - British Library ...

The failure and fracture analysis of adhesive bonds

Chen, Z

January 1985

SIGLEAvailable from British Library Lending Division - LD:D65664/86 / BLDSC - British Library Docume...

Failure criteria for evaluating Strength of Adhesive joints

Kadam, S. (author)

October 2014

An attempt is made to evaluate all possible stress based failure criteria that have been otherwise t...

A fracture mechanics approach to the failure of epoxy adhesives

Bell, A.J.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN018149 / BLDSC - British Library D...

Fatigue and fracture of structural adhesives

Luckyram, J

January 1988

SIGLEAvailable from British Library Document Supply Centre- DSC:D184086 / BLDSC - British Library Do...

A fracture mechanics approach to the failure of adhesive joints

Paraschi, Marion

January 2002

Available from British Library Document Supply Centre- DSC:DXN062052 / BLDSC - British Library Docum...

Stress and failure analysis of adhesively bonded joints

Zhao, X

January 1991

SIGLEAvailable from British Library Document Supply Centre-DSC:DX190909 / BLDSC - British Library Do...

The nature of bond formation and failure in wood-adhesive systems

Phanopoulos, C
Leicester Polytechnic (United Kingdom)
Council for National Academic Awards (CNAA), London (United Kingdom)

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D72339/87 / BLDSC - British Library ...

An evaluation of yield criteria for adhesives for finite element analysis

Dean, G.
Read, B.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(117) / BLDSC - British Lib...

Studies into the failure prediction of brittle materials

Nguyen, P.D
Cranfield Inst. of Tech. (United Kingdom)

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:DX82216 / BLDSC - British Library Do...

Criteria of failure for polymer blends

Morley, K.P
Manchester Polytechnic (United Kingdom)
Council for National Academic Awards, London (United Kingdom)

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX97041 / BLDSC - British Library Do...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

On the probability of failure of components that fail in a brittle manner

Stanley, P.
UKAEA, Warrington. Safety and Reliability Directorate

LD:9091.9F(ART--8) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Site-applied adhesives Failures and how to avoid them

Rosaman, D
Coad, J.R.
Building Research Establishment (BRE), Watford (United Kingdom)

January 1986

Available from British Library Document Supply Centre- DSC:2277.48(BRE-IP--12/86) / BLDSC - British ...

A failure criterion for fillet welds

Higgs, J

January 1981

SIGLEAvailable from British Library Document Supply Centre- DSC:D36951/81 / BLDSC - British Library ...

The failure and fracture analysis of adhesive bonds

Chen, Z

January 1985

SIGLEAvailable from British Library Lending Division - LD:D65664/86 / BLDSC - British Library Docume...

Failure criteria for evaluating Strength of Adhesive joints

Kadam, S. (author)

October 2014

An attempt is made to evaluate all possible stress based failure criteria that have been otherwise t...

A fracture mechanics approach to the failure of epoxy adhesives

Bell, A.J.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN018149 / BLDSC - British Library D...

Fatigue and fracture of structural adhesives

Luckyram, J

January 1988

SIGLEAvailable from British Library Document Supply Centre- DSC:D184086 / BLDSC - British Library Do...

A fracture mechanics approach to the failure of adhesive joints

Paraschi, Marion

January 2002

Available from British Library Document Supply Centre- DSC:DXN062052 / BLDSC - British Library Docum...

Stress and failure analysis of adhesively bonded joints

Zhao, X

January 1991

SIGLEAvailable from British Library Document Supply Centre-DSC:DX190909 / BLDSC - British Library Do...

The nature of bond formation and failure in wood-adhesive systems

Phanopoulos, C
Leicester Polytechnic (United Kingdom)
Council for National Academic Awards (CNAA), London (United Kingdom)

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D72339/87 / BLDSC - British Library ...

An evaluation of yield criteria for adhesives for finite element analysis

Dean, G.
Read, B.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(117) / BLDSC - British Lib...

Studies into the failure prediction of brittle materials

Nguyen, P.D
Cranfield Inst. of Tech. (United Kingdom)

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:DX82216 / BLDSC - British Library Do...

Criteria of failure for polymer blends

Morley, K.P
Manchester Polytechnic (United Kingdom)
Council for National Academic Awards, London (United Kingdom)

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX97041 / BLDSC - British Library Do...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

On the probability of failure of components that fail in a brittle manner

Stanley, P.
UKAEA, Warrington. Safety and Reliability Directorate

LD:9091.9F(ART--8) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

A proposed failure criterion for tough adhesives

Abstract

Extracted data

A proposed failure criterion for tough adhesives

Abstract

Extracted data

Related items

Related items