Transverse wall thickness variation and internal fluting of tubes during reduction with tension

Reduction of dynamic loads on components of tube length parting machine of 159-529 mill

Grebenik, V.M.
Maknitskii, I.G.
Vdovin, V.D.
Tsapko, V.K.
Anisimov, V.A
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (12) p. 130-133)SIGLEAvaila...

Stress state of thin wall welded structures with continuous and surface cracks in the weld zone

Kepich, T.Yu.
Rudyak, Yu.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1989

25.00; Translated from Russian (Avtom. Svarka 1988 41(5) p. 9-12)Available from British Library Docu...

Technological factors affecting the swelling of the tube ends in the stretch reducing mills

Kubinski, W.
Kajtoch, J.
Metals Society, London (UK). British Industrial and Scientific International Translation Service

January 1980

12.00; translated from Hutnik (Katowice) (1979) (pt.4) p. 172-177SIGLELD:9022.06(BISI--19136) / BLDS...

Change in wall thickness irregularity from cross-section to cross-section of seamless tubes during cold pilger rolling

Kuznetsov, E.D
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

14.25; Translated from Russian (Stal' 1984 (12) p. 39-42)Available from British Library Document Sup...

Elongations of layers during reduction of two-layer tubes

Konovalov, A.V.
Mikhailov, A.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 155-156)SIGLEAvaila...

Factors governing the wall thickness variation in tubes during sinking

Yao, R.
Zhong, J.
Liu, X.
Mo, J
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Chinese (Acta Metall. Sin. (China) 1986 v. 22(3) p. B118-B125)Available from ...

Calculation of residual stresses in tubes after drawing

Tropotov, A.V.
Bogatov, A.A.
Mkrtchyan, G.S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (2) p. 48-51)Availab...

Stress strain state during hydraulic extrusion of tubes

Balakin, V.F.
Kuz'menko, V.I.
Fen', G.A.
Korzh, A.P.
Shlyakhturov, A.Yu
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 75-77)SIGLEA...

Reducing the transverse wall thickness difference in pipes by new roll design in the automatic rolling mill

Kocur, J.
Kotrbaty, J.
Bar, J
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

18.00; Translated from Czech (Hutn. Listy 1987 v. 42(4) p. 239-244)SIGLEAvailable from British Libra...

Thickness variation of strips during rolling with the use of hydraulic automatic control systems

Dukmasov, V.G
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (10) p. 55-60)Availa...

Investigation of the Geometry of Metal Tube Walls after Necking in Uniaxial Tension

Chong Li
Daxin E
Jingwen Zhang
Ning Yi

March 2017

Abstract: In order to characterize the deformation and true stress–strain relation of metal tubes, t...

Variation in the temperature of the wall of an air tuyere in contact with molten metal

Lymbina, L.E.
Yaroshenko, Yu.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (10) p. 103-107)SIGLEAvaila...

Indirect determination of tension during continuous rolling of thick sections

Vydrin, V.N.
Sychev, V.A.
Fedosienko, A.S.
Cheredinov, M.N.
Geis, A.R
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

15.00 Translated from Russian (Isv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (2) p. 82-85)Availabl...

Tube reducing work center. Defining degree of hot-rolled tube deformation during reducing

Czartoryski, B.

January 2007

W artykule opisano gniazdo do obciskania rur oraz proces technologiczny obciskania rury o średnicy ...

Force conditions during drawing of tube billets

Potapov, I.N.
Goncharuk, A.V.
Frolov, A.N
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1986

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (3) p. 147-148)SIGLEAvailab...

Reduction of dynamic loads on components of tube length parting machine of 159-529 mill

Grebenik, V.M.
Maknitskii, I.G.
Vdovin, V.D.
Tsapko, V.K.
Anisimov, V.A
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (12) p. 130-133)SIGLEAvaila...

Stress state of thin wall welded structures with continuous and surface cracks in the weld zone

Kepich, T.Yu.
Rudyak, Yu.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1989

25.00; Translated from Russian (Avtom. Svarka 1988 41(5) p. 9-12)Available from British Library Docu...

Technological factors affecting the swelling of the tube ends in the stretch reducing mills

Kubinski, W.
Kajtoch, J.
Metals Society, London (UK). British Industrial and Scientific International Translation Service

January 1980

12.00; translated from Hutnik (Katowice) (1979) (pt.4) p. 172-177SIGLELD:9022.06(BISI--19136) / BLDS...

Change in wall thickness irregularity from cross-section to cross-section of seamless tubes during cold pilger rolling

Kuznetsov, E.D
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

14.25; Translated from Russian (Stal' 1984 (12) p. 39-42)Available from British Library Document Sup...

Elongations of layers during reduction of two-layer tubes

Konovalov, A.V.
Mikhailov, A.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 155-156)SIGLEAvaila...

Factors governing the wall thickness variation in tubes during sinking

Yao, R.
Zhong, J.
Liu, X.
Mo, J
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Chinese (Acta Metall. Sin. (China) 1986 v. 22(3) p. B118-B125)Available from ...

Calculation of residual stresses in tubes after drawing

Tropotov, A.V.
Bogatov, A.A.
Mkrtchyan, G.S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (2) p. 48-51)Availab...

Stress strain state during hydraulic extrusion of tubes

Balakin, V.F.
Kuz'menko, V.I.
Fen', G.A.
Korzh, A.P.
Shlyakhturov, A.Yu
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 75-77)SIGLEA...

Reducing the transverse wall thickness difference in pipes by new roll design in the automatic rolling mill

Kocur, J.
Kotrbaty, J.
Bar, J
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

18.00; Translated from Czech (Hutn. Listy 1987 v. 42(4) p. 239-244)SIGLEAvailable from British Libra...

Thickness variation of strips during rolling with the use of hydraulic automatic control systems

Dukmasov, V.G
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (10) p. 55-60)Availa...

Investigation of the Geometry of Metal Tube Walls after Necking in Uniaxial Tension

Chong Li
Daxin E
Jingwen Zhang
Ning Yi

March 2017

Abstract: In order to characterize the deformation and true stress–strain relation of metal tubes, t...

Variation in the temperature of the wall of an air tuyere in contact with molten metal

Lymbina, L.E.
Yaroshenko, Yu.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (10) p. 103-107)SIGLEAvaila...

Indirect determination of tension during continuous rolling of thick sections

Vydrin, V.N.
Sychev, V.A.
Fedosienko, A.S.
Cheredinov, M.N.
Geis, A.R
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

15.00 Translated from Russian (Isv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (2) p. 82-85)Availabl...

Tube reducing work center. Defining degree of hot-rolled tube deformation during reducing

Czartoryski, B.

January 2007

W artykule opisano gniazdo do obciskania rur oraz proces technologiczny obciskania rury o średnicy ...

Force conditions during drawing of tube billets

Potapov, I.N.
Goncharuk, A.V.
Frolov, A.N
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1986

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (3) p. 147-148)SIGLEAvailab...

Reduction of dynamic loads on components of tube length parting machine of 159-529 mill

Grebenik, V.M.
Maknitskii, I.G.
Vdovin, V.D.
Tsapko, V.K.
Anisimov, V.A
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (12) p. 130-133)SIGLEAvaila...

Stress state of thin wall welded structures with continuous and surface cracks in the weld zone

Kepich, T.Yu.
Rudyak, Yu.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1989

25.00; Translated from Russian (Avtom. Svarka 1988 41(5) p. 9-12)Available from British Library Docu...

Technological factors affecting the swelling of the tube ends in the stretch reducing mills

Kubinski, W.
Kajtoch, J.
Metals Society, London (UK). British Industrial and Scientific International Translation Service

January 1980

12.00; translated from Hutnik (Katowice) (1979) (pt.4) p. 172-177SIGLELD:9022.06(BISI--19136) / BLDS...

Transverse wall thickness variation and internal fluting of tubes during reduction with tension

Abstract

Extracted data

Transverse wall thickness variation and internal fluting of tubes during reduction with tension

Abstract

Extracted data

Related items

Related items