A strategy for investigating the influence of processing conditions on the dimensional stability of injection moulded artifacts

Some aspects concerning the powder injection moulding of hardmetal components

Martyn, M.T

January 1991

SIGLEAvailable from British Library Document Supply Centre- DSC:DX170972 / BLDSC - British Library D...

Some aspects of the injection moulding of alumina and other engineering ceramics

Youseffi, M.

January 1992

SIGLEAvailable from British Library Document Supply Centre-DSC:DX209410 / BLDSC - British Library Do...

Controlling the morphology of parts produced by stereolithography injection moulds

Harris, Russell A.

January 2002

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN063575 / BLDSC - British Library ...

Predicting and controlling the dimensional stability of injection moulded plastic parts

Tomlins, P.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(60) / BLDSC - British Libr...

The influence of processing conditions on the dimensional stability of pigmented mouldings

Allan, P.
Butler, B.
Cook, H.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(194) / BLDSC - British Lib...

The dimensional stability of moulded parts A review of the technology base

Tomlins, P.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(52) / BLDSC - British Libr...

O'Donnell, B

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX170106 / BLDSC - British Library D...

Influence of process-induced stresses on the mechanical behaviour and dimensional stability of thermoplastic injection mouldings

Ozden, S

January 1994

SIGLEAvailable from British Library Document Supply Centre- DSC:DX181295 / BLDSC - British Library D...

The influence of pigments on the dimensional stability of moulded plates

Tomlins, P.
Banyard, J.
Butler, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(129) / BLDSC - British Lib...

Evaluation of mould designs for preparing standard plate specimens of plastics by injection moulding

Rides, M.
Dean, G
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(NPL-CMMT(A)--30) / BLDSC -...

Multi-material injection moulding

Goodship, V.
Love, J.
Rapra Technology Ltd., Shrewsbury (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:7291.760(vol 13 no 1 (145)) / BLDSC -...

An investigation into sand tooling methods for the production of injection moulded prototype parts

Soe, S.P.

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036548 / BLDSC - British Library D...

Measuring the dimensional stability of composites

Lord, J.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5656(014) / BLDSC - British Libr...

Effects of machine variables on the quality of injection mouldings An interlaboratory trial; part 2; high density polyethylene

Wright, D.G.M.
Tickner, R.L.
Tobias, R.W
Materials Quality Assurance Directorate, Woolwich (United Kingdom)

January 1984

SIGLEAvailable from British Library Document Supply Centre- DSC:5980.7332(MQAD--328) / BLDSC - Briti...

Computer monitoring and analysis of thermoset injection moulding

Sharp, D.A

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D73201/87 / BLDSC - British Library ...

Some aspects concerning the powder injection moulding of hardmetal components

Martyn, M.T

January 1991

SIGLEAvailable from British Library Document Supply Centre- DSC:DX170972 / BLDSC - British Library D...

Some aspects of the injection moulding of alumina and other engineering ceramics

Youseffi, M.

January 1992

SIGLEAvailable from British Library Document Supply Centre-DSC:DX209410 / BLDSC - British Library Do...

Controlling the morphology of parts produced by stereolithography injection moulds

Harris, Russell A.

January 2002

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN063575 / BLDSC - British Library ...

Predicting and controlling the dimensional stability of injection moulded plastic parts

Tomlins, P.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(60) / BLDSC - British Libr...

The influence of processing conditions on the dimensional stability of pigmented mouldings

Allan, P.
Butler, B.
Cook, H.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(194) / BLDSC - British Lib...

The dimensional stability of moulded parts A review of the technology base

Tomlins, P.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(52) / BLDSC - British Libr...

O'Donnell, B

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX170106 / BLDSC - British Library D...

Influence of process-induced stresses on the mechanical behaviour and dimensional stability of thermoplastic injection mouldings

Ozden, S

January 1994

SIGLEAvailable from British Library Document Supply Centre- DSC:DX181295 / BLDSC - British Library D...

The influence of pigments on the dimensional stability of moulded plates

Tomlins, P.
Banyard, J.
Butler, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(129) / BLDSC - British Lib...

Evaluation of mould designs for preparing standard plate specimens of plastics by injection moulding

Rides, M.
Dean, G
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(NPL-CMMT(A)--30) / BLDSC -...

Multi-material injection moulding

Goodship, V.
Love, J.
Rapra Technology Ltd., Shrewsbury (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:7291.760(vol 13 no 1 (145)) / BLDSC -...

An investigation into sand tooling methods for the production of injection moulded prototype parts

Soe, S.P.

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036548 / BLDSC - British Library D...

Measuring the dimensional stability of composites

Lord, J.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5656(014) / BLDSC - British Libr...

Effects of machine variables on the quality of injection mouldings An interlaboratory trial; part 2; high density polyethylene

Wright, D.G.M.
Tickner, R.L.
Tobias, R.W
Materials Quality Assurance Directorate, Woolwich (United Kingdom)

January 1984

SIGLEAvailable from British Library Document Supply Centre- DSC:5980.7332(MQAD--328) / BLDSC - Briti...

Computer monitoring and analysis of thermoset injection moulding

Sharp, D.A

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D73201/87 / BLDSC - British Library ...

Some aspects concerning the powder injection moulding of hardmetal components

Martyn, M.T

January 1991

SIGLEAvailable from British Library Document Supply Centre- DSC:DX170972 / BLDSC - British Library D...

Some aspects of the injection moulding of alumina and other engineering ceramics

Youseffi, M.

January 1992

SIGLEAvailable from British Library Document Supply Centre-DSC:DX209410 / BLDSC - British Library Do...

Controlling the morphology of parts produced by stereolithography injection moulds

Harris, Russell A.

January 2002

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN063575 / BLDSC - British Library ...

A strategy for investigating the influence of processing conditions on the dimensional stability of injection moulded artifacts

Abstract

Extracted data

A strategy for investigating the influence of processing conditions on the dimensional stability of injection moulded artifacts

Abstract

Extracted data

Related items

Related items