Possibilities and experiences with mechanical steam compression and exhaustion of liquor in the Scandinavian cellulose industry

Energy Analysis of Hemicellulose Extraction at a Softwood Kraft Pulp Mill - Case Study of Södra Cell Värö

Bood, Jon
Nilsson, Linus

January 2013

The Swedish pulp and paper industry is struggling with lower revenues and high raw material cost. Th...

Experience in the construction and operation of lignite-fired plants

Geissler, T.
Schueler, U
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (Mitteilungen der VGB, Jun 1971 v. 51(3) p. 188-202)SIGLEAvailable from Briti...

Heat pumps for heat recovery from paper dryers producing process steam from the dryer exhaust air

Friedel, W.
Grammatte, W.
Hampel, H.J.
British Gas Corp., London (United Kingdom)

January 1986

Translated from German (EUR 10553 EN)Available from British Library Document Supply Centre- DSC:9022...

Vapour compression in breweries

Stippler, K
Electricity Council, London (United Kingdom). Overseas Relations Branch

January 1986

Translated from German (VDI Berichte 533, VDI-Gesellschaft Energietech. Conf., Basel (CH), 3-4 May 1...

The use of bursting discs in the chemical industry

Donat, C.
Health and Safety Executive, Buxton (United Kingdom). Translation Services

January 2001

Translated from German. (TUE 23 1982 no 4 April)SIGLEAvailable from British Library Document Supply ...

The use of additives to heating oil and combustion gases in large steam generators

Buttner, W
Electricity Supply Board (ESB), Dublin (Ireland). Library and Information Services

January 1988

Translated from German (VGB Kraftwerkstech. 1976 v. 56(6) p. 388-395)SIGLEAvailable from British Lib...

Steam compression in the single screw compressor

Yell, M.D

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D71046/86 / BLDSC - British Library ...

Requirements for vapour compressors using steam and other media

Kleinhenz, K
Electricity Council, London (United Kingdom). Overseas Relations Branch

January 1986

Translated from German (VDI (Ver. Dtsch. Ing.) Ber. 1982 (442) p. 45-51)Available from British Libra...

On some new developments in coking technology

Beck, K.G
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

13.00; Translated from German (Stahl Eisen 1984 v. 104(7) p. 339-342)SIGLEAvailable from British Lib...

Rolling technology studies in a rod mill taking special account of the rolling forces

Kutzsche, K.
Kletzin, P.
Fincke, W.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from German (Neue Huette 1985 v. 30(1) p. 18-21)SIGLEAvailable from British Library Docum...

Development and testing of alcohol fuels for commercial vehicle diesel engines

Heinrich, W
Motor Industry Research Association (MIRA), Nuneaton (United Kingdom)

January 1987

Translated from German (Motortech. Z. Mar 1987)SIGLEAvailable from British Library Document Supply C...

Safety technology on packing machines Technical report - butchering

Health and Safety Executive (HSE), London (United Kingdom)

January 1989

10.00; Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.381(HSE...

Investigations into the combustibility of water-dilutable paints and printing inks

Hansen, W
Health and Safety Executive (HSE), London (United Kingdom)

January 1988

25.00; Translated from German (Farbe Lack 1981 v. 87(7) p. 551-556)SIGLEAvailable from British Libra...

Process steam : Steam conditioning at a pulp and paper mill

Nyberg, Thomas

January 2007

Abstract This report is the result of an examination work at the University of Karlstad. The purpose...

Pulp and paper in Eastern Europe and the former USSR Growth industry of the future

Kalmar, P.
Tarjan, Z
Economist Intelligence Unit, London (United Kingdom)

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:3668.239(EIU-SR--556) / BLDSC - Brit...

Energy Analysis of Hemicellulose Extraction at a Softwood Kraft Pulp Mill - Case Study of Södra Cell Värö

Bood, Jon
Nilsson, Linus

January 2013

The Swedish pulp and paper industry is struggling with lower revenues and high raw material cost. Th...

Experience in the construction and operation of lignite-fired plants

Geissler, T.
Schueler, U
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (Mitteilungen der VGB, Jun 1971 v. 51(3) p. 188-202)SIGLEAvailable from Briti...

Heat pumps for heat recovery from paper dryers producing process steam from the dryer exhaust air

Friedel, W.
Grammatte, W.
Hampel, H.J.
British Gas Corp., London (United Kingdom)

January 1986

Translated from German (EUR 10553 EN)Available from British Library Document Supply Centre- DSC:9022...

Vapour compression in breweries

Stippler, K
Electricity Council, London (United Kingdom). Overseas Relations Branch

January 1986

Translated from German (VDI Berichte 533, VDI-Gesellschaft Energietech. Conf., Basel (CH), 3-4 May 1...

The use of bursting discs in the chemical industry

Donat, C.
Health and Safety Executive, Buxton (United Kingdom). Translation Services

January 2001

Translated from German. (TUE 23 1982 no 4 April)SIGLEAvailable from British Library Document Supply ...

The use of additives to heating oil and combustion gases in large steam generators

Buttner, W
Electricity Supply Board (ESB), Dublin (Ireland). Library and Information Services

January 1988

Translated from German (VGB Kraftwerkstech. 1976 v. 56(6) p. 388-395)SIGLEAvailable from British Lib...

Steam compression in the single screw compressor

Yell, M.D

January 1986

SIGLEAvailable from British Library Document Supply Centre- DSC:D71046/86 / BLDSC - British Library ...

Requirements for vapour compressors using steam and other media

Kleinhenz, K
Electricity Council, London (United Kingdom). Overseas Relations Branch

January 1986

Translated from German (VDI (Ver. Dtsch. Ing.) Ber. 1982 (442) p. 45-51)Available from British Libra...

On some new developments in coking technology

Beck, K.G
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

13.00; Translated from German (Stahl Eisen 1984 v. 104(7) p. 339-342)SIGLEAvailable from British Lib...

Rolling technology studies in a rod mill taking special account of the rolling forces

Kutzsche, K.
Kletzin, P.
Fincke, W.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from German (Neue Huette 1985 v. 30(1) p. 18-21)SIGLEAvailable from British Library Docum...

Development and testing of alcohol fuels for commercial vehicle diesel engines

Heinrich, W
Motor Industry Research Association (MIRA), Nuneaton (United Kingdom)

January 1987

Translated from German (Motortech. Z. Mar 1987)SIGLEAvailable from British Library Document Supply C...

Safety technology on packing machines Technical report - butchering

Health and Safety Executive (HSE), London (United Kingdom)

January 1989

10.00; Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.381(HSE...

Investigations into the combustibility of water-dilutable paints and printing inks

Hansen, W
Health and Safety Executive (HSE), London (United Kingdom)

January 1988

25.00; Translated from German (Farbe Lack 1981 v. 87(7) p. 551-556)SIGLEAvailable from British Libra...

Process steam : Steam conditioning at a pulp and paper mill

Nyberg, Thomas

January 2007

Abstract This report is the result of an examination work at the University of Karlstad. The purpose...

Pulp and paper in Eastern Europe and the former USSR Growth industry of the future

Kalmar, P.
Tarjan, Z
Economist Intelligence Unit, London (United Kingdom)

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:3668.239(EIU-SR--556) / BLDSC - Brit...

Energy Analysis of Hemicellulose Extraction at a Softwood Kraft Pulp Mill - Case Study of Södra Cell Värö

Bood, Jon
Nilsson, Linus

January 2013

The Swedish pulp and paper industry is struggling with lower revenues and high raw material cost. Th...

Experience in the construction and operation of lignite-fired plants

Geissler, T.
Schueler, U
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (Mitteilungen der VGB, Jun 1971 v. 51(3) p. 188-202)SIGLEAvailable from Briti...

Heat pumps for heat recovery from paper dryers producing process steam from the dryer exhaust air

Friedel, W.
Grammatte, W.
Hampel, H.J.
British Gas Corp., London (United Kingdom)

January 1986

Translated from German (EUR 10553 EN)Available from British Library Document Supply Centre- DSC:9022...

Possibilities and experiences with mechanical steam compression and exhaustion of liquor in the Scandinavian cellulose industry

Abstract

Extracted data

Possibilities and experiences with mechanical steam compression and exhaustion of liquor in the Scandinavian cellulose industry

Abstract

Extracted data

Related items

Related items