Induction heating of sintered low alloy steel powder compacts An experimental and theoretical study of through-heating shaped parts for forging

Development of a Powder Metallurgical Self Cooling Forging Die with Inner Cavities

Behrens, Bernd-Arno
Kammler, M.
Klassen, A.
Vahed, N.
Bonhage, M.

January 2014

Powder metallurgy is known for its high potential for producing near net-shape products. A material ...

Modelling of Induction Heating of Steel Work Piece for Forging of Crankshaft

Rasa KANDROTAITĖ JANUTIENĖ
Darius MAŽEIKA

August 2018

Vanadium microalloyed steel forgings provide high performance and cost effective solutions for autom...

Densification and microstructure changes of micron size nickel powder during direct induction sintering

Guyon, A.
Bouvard, D.
Chaix, J.M.
Carry, C.P.

January 2014

International audienceInduction heating is an attractive technique to sinter metal powders in a shor...

Potentials of single stage induction heating for press hardening of steel blanks

Nacke, B.
Dietrich, A.

January 2018

Due to growing challenges regarding crash-performance, CO2 emission as well as increasing demand for...

Thermal analyses for induction sintering of powder metal compacts up to sintering temperature

Çavdar, U.
Akgül, M.B.
Atik, E.
Karaca, H.

September 2014

Induction sintering is developed as an alternative method to conventional sintering in order to sint...

Research on a New Localized Induction Heating Process for Hot Stamping Steel Blanks

Li Bao
Jingqi Chen
Qi Li
Yu Gu
Jian Wu
Weijie Liu

March 2019

Localized induction heating with one magnetizer was experimentally analyzed in order to investigate ...

INTRICACIES FOR THE SUCCESSFUL INDUCTION HEATING OF STEELS IN MODERN FORGE SHOPS

January 2015

Over the past three decades, induction heating has become an increasingly popular in forge shops. Am...

Induction Sintering of %3 Cu Contented Iron Based Powder Metal Parts

Uğur Çavdar

September 2016

In this study; iron powder metals were sintered with induction heating process. Sintering process ha...

DEVELOPMENT of TECHNOLOGY SOFTENING INDUCTION ANNEALINGOF WORKPIECES FROM STEEL X15

T V Sokolova
A M Sokolov

July 2016

The article is devoted to the development of modes softening annealing treatment steel15Хusing high ...

JOURNAL DE PHYSIQUE IV

January 2015

A comprehensive micro-macroscopic model of the continuous hardening of 3d-axisymmetric steel compone...

Development of technology for manufacturing of carbon and medium-alloy steel forgings for the automotive industry using induction charge heating

Wrożyna, A.
Kuziak, R.

January 2012

Artykuł prezentuje rezultaty badań przeprowadzonych w celu opracowania technologii kucia odkuwek dla...

Transverse flux induction heating of aluminium alloy strip

Waggott, R.
Walker, D.J.
Gibson, R.C.
Johnson, R.M.
Electricity Council Research Centre, Capenhurst (UK)

January 1981

SIGLELD:6413.35F(PB--82-121658)(microfiche). / BLDSC - British Library Document Supply CentreGBUnite...

A study of the heat treatment of some non-ferrous alloys using the transverse flux induction process

Edwards, R.J

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:D74880/87 / BLDSC - British Library ...

A novel method for the design of induction heating work coils

Ali K.M. Al-Shaikhli (7203167)

January 1985

Induction billet heating is a well-established industrial process for preheating prior to forging, r...

Tensile Properties and Fracture Behaviour of Induction Sintered Ti and Ti-6Al-4V (wt %) Powder Compacts

Raynova, Stiliana
Zhang, Deliang
Polo, D.
Gonthier, L.
Egea, W.
Nadakuduru, Vijay Navaratna

January 2011

Induction heating of powder compacts could be a very effective method for metal powder consolidation...

Development of a Powder Metallurgical Self Cooling Forging Die with Inner Cavities

Behrens, Bernd-Arno
Kammler, M.
Klassen, A.
Vahed, N.
Bonhage, M.

January 2014

Powder metallurgy is known for its high potential for producing near net-shape products. A material ...

Modelling of Induction Heating of Steel Work Piece for Forging of Crankshaft

Rasa KANDROTAITĖ JANUTIENĖ
Darius MAŽEIKA

August 2018

Vanadium microalloyed steel forgings provide high performance and cost effective solutions for autom...

Densification and microstructure changes of micron size nickel powder during direct induction sintering

Guyon, A.
Bouvard, D.
Chaix, J.M.
Carry, C.P.

January 2014

International audienceInduction heating is an attractive technique to sinter metal powders in a shor...

Potentials of single stage induction heating for press hardening of steel blanks

Nacke, B.
Dietrich, A.

January 2018

Due to growing challenges regarding crash-performance, CO2 emission as well as increasing demand for...

Thermal analyses for induction sintering of powder metal compacts up to sintering temperature

Çavdar, U.
Akgül, M.B.
Atik, E.
Karaca, H.

September 2014

Induction sintering is developed as an alternative method to conventional sintering in order to sint...

Research on a New Localized Induction Heating Process for Hot Stamping Steel Blanks

Li Bao
Jingqi Chen
Qi Li
Yu Gu
Jian Wu
Weijie Liu

March 2019

Localized induction heating with one magnetizer was experimentally analyzed in order to investigate ...

INTRICACIES FOR THE SUCCESSFUL INDUCTION HEATING OF STEELS IN MODERN FORGE SHOPS

January 2015

Over the past three decades, induction heating has become an increasingly popular in forge shops. Am...

Induction Sintering of %3 Cu Contented Iron Based Powder Metal Parts

Uğur Çavdar

September 2016

In this study; iron powder metals were sintered with induction heating process. Sintering process ha...

DEVELOPMENT of TECHNOLOGY SOFTENING INDUCTION ANNEALINGOF WORKPIECES FROM STEEL X15

T V Sokolova
A M Sokolov

July 2016

The article is devoted to the development of modes softening annealing treatment steel15Хusing high ...

JOURNAL DE PHYSIQUE IV

January 2015

A comprehensive micro-macroscopic model of the continuous hardening of 3d-axisymmetric steel compone...

Development of technology for manufacturing of carbon and medium-alloy steel forgings for the automotive industry using induction charge heating

Wrożyna, A.
Kuziak, R.

January 2012

Artykuł prezentuje rezultaty badań przeprowadzonych w celu opracowania technologii kucia odkuwek dla...

Transverse flux induction heating of aluminium alloy strip

Waggott, R.
Walker, D.J.
Gibson, R.C.
Johnson, R.M.
Electricity Council Research Centre, Capenhurst (UK)

January 1981

SIGLELD:6413.35F(PB--82-121658)(microfiche). / BLDSC - British Library Document Supply CentreGBUnite...

A study of the heat treatment of some non-ferrous alloys using the transverse flux induction process

Edwards, R.J

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:D74880/87 / BLDSC - British Library ...

A novel method for the design of induction heating work coils

Ali K.M. Al-Shaikhli (7203167)

January 1985

Induction billet heating is a well-established industrial process for preheating prior to forging, r...

Tensile Properties and Fracture Behaviour of Induction Sintered Ti and Ti-6Al-4V (wt %) Powder Compacts

Raynova, Stiliana
Zhang, Deliang
Polo, D.
Gonthier, L.
Egea, W.
Nadakuduru, Vijay Navaratna

January 2011

Induction heating of powder compacts could be a very effective method for metal powder consolidation...

Development of a Powder Metallurgical Self Cooling Forging Die with Inner Cavities

Behrens, Bernd-Arno
Kammler, M.
Klassen, A.
Vahed, N.
Bonhage, M.

January 2014

Powder metallurgy is known for its high potential for producing near net-shape products. A material ...

Modelling of Induction Heating of Steel Work Piece for Forging of Crankshaft

Rasa KANDROTAITĖ JANUTIENĖ
Darius MAŽEIKA

August 2018

Vanadium microalloyed steel forgings provide high performance and cost effective solutions for autom...

Densification and microstructure changes of micron size nickel powder during direct induction sintering

Guyon, A.
Bouvard, D.
Chaix, J.M.
Carry, C.P.

January 2014

International audienceInduction heating is an attractive technique to sinter metal powders in a shor...

Induction heating of sintered low alloy steel powder compacts An experimental and theoretical study of through-heating shaped parts for forging

Abstract

Extracted data

Induction heating of sintered low alloy steel powder compacts An experimental and theoretical study of through-heating shaped parts for forging

Abstract

Extracted data

Related items

Related items