Effect of cold-rolling on mechanical properties of Al/alumina short fibre composites

Low-temperature impact toughness of Al-Li alloys

Kobayashi, T.
Niinomi, M.
Degawa, K
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Keikinzoku 1987 v. 37(12) p. 816-823)SIGLEAvailable from British Library D...

Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel

Sohn, SS
Lee, BJ
Lee, S
Kwak, JH

September 2013

The effects of Al content on cracking phenomena occurring during cold rolling of ferritic lightweigh...

On the relation between the mechanical properties of carbon fibres and those of composite materials The tensile properties

Matsui, J.
Nomura, S.
Ishii, Y
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

35.00; Translated from Japanese (J. Jpn. Soc. Compos. Mater. 1986 v. 12(3) p. 13-19)SIGLEAvailable f...

Effects of cold-rolling and annealing on internal friction of iron sintered compacts and lead-infiltrated iron sintered compacts

Yokota, M.
Moriguchi, H.
Takase, A.
Shoji, K
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

35.00; Translated from Japanese (J. Jpn. Soc. Powder Metall. 1987 v. 34(3) p. 123-128)SIGLEAvailable...

Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites

Mandal, D
Dutta, B K
Panigrahi, S C

October 2007

In the present investigation aluminium base short plain steel fiber, copper and nickel coated steel ...

Preparation of fine steel wire-reinforced aluminium composites by powder rolling

Morooka, T.
Yuasa, E.
Shu, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Keikinzoku 1987 v. 37(3) p. 199-206)Available from British Library Documen...

The influence of controlled rolling on the microstructure and resistance to cold-brittleness of carbon steel shipbuilding plates

Li, W.
Fu, L
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

35.00; Translated from Chinese (Iron and Steel 1983 v. 18(3) p. 25-32)SIGLEAvailable from British Li...

High temperature deformation of short fibre reinforced aluminium based composites

Stanford-Beale, C.A

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:D60834 / BLDSC - British Library Doc...

Mechanical behaviour of fibre reinforced and particulate reinforced ceramic composites

Fantozzi, G
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.50; Translated from French (Silic. Ind. 1988 v. 53(5-6) p. 67-84)Available from British Library D...

The effect of fibre-bundling on the mechanical properties of a short-fibre composite

Mulligan, D.R.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN034478 / BLDSC - British Library D...

Influence of rolling and cooling process on microstructure and properties of C-Mn steel treated with Al-Ti-CaSi combined addition

Ye, S.
Ding, W.
Fang, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Chinese (Gangtie 1988 v. 23(9) p. 31-35)SIGLEAvailable from British Library Document...

Deformation of undirectional fibre-reinforced composite induced by temperature change and external loading

Yano, T.
Omori, M
Yanagisawa, O.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

60.00; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1988 v. 52(2) p. 229-235)SIGLEAvailable f...

Fracture behaviour of silicon-carbide fibre-reinforced aluminium alloys

Towata, S.
Yamada, S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1986 v. 50(3) p. 336-341)SIGLEAvailable f...

Mechanical properties of GFRP composite materials at cryogenic temperatures

Takaai, T.
Sano, K.
Fukushima, E
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Zairyo 1988 v. 37(421) p. 1185-1190)Available from British Library Documen...

Manufacture and properties of fibre reinforced metal composites

Okura, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

55.00; Translated from Japanese (Sosei To Kako 1988 v. 29(326) p. 248-254)Available from British Lib...

Low-temperature impact toughness of Al-Li alloys

Kobayashi, T.
Niinomi, M.
Degawa, K
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Keikinzoku 1987 v. 37(12) p. 816-823)SIGLEAvailable from British Library D...

Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel

Sohn, SS
Lee, BJ
Lee, S
Kwak, JH

September 2013

The effects of Al content on cracking phenomena occurring during cold rolling of ferritic lightweigh...

On the relation between the mechanical properties of carbon fibres and those of composite materials The tensile properties

Matsui, J.
Nomura, S.
Ishii, Y
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

35.00; Translated from Japanese (J. Jpn. Soc. Compos. Mater. 1986 v. 12(3) p. 13-19)SIGLEAvailable f...

Effects of cold-rolling and annealing on internal friction of iron sintered compacts and lead-infiltrated iron sintered compacts

Yokota, M.
Moriguchi, H.
Takase, A.
Shoji, K
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

35.00; Translated from Japanese (J. Jpn. Soc. Powder Metall. 1987 v. 34(3) p. 123-128)SIGLEAvailable...

Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites

Mandal, D
Dutta, B K
Panigrahi, S C

October 2007

In the present investigation aluminium base short plain steel fiber, copper and nickel coated steel ...

Preparation of fine steel wire-reinforced aluminium composites by powder rolling

Morooka, T.
Yuasa, E.
Shu, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Keikinzoku 1987 v. 37(3) p. 199-206)Available from British Library Documen...

The influence of controlled rolling on the microstructure and resistance to cold-brittleness of carbon steel shipbuilding plates

Li, W.
Fu, L
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

35.00; Translated from Chinese (Iron and Steel 1983 v. 18(3) p. 25-32)SIGLEAvailable from British Li...

High temperature deformation of short fibre reinforced aluminium based composites

Stanford-Beale, C.A

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:D60834 / BLDSC - British Library Doc...

Mechanical behaviour of fibre reinforced and particulate reinforced ceramic composites

Fantozzi, G
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.50; Translated from French (Silic. Ind. 1988 v. 53(5-6) p. 67-84)Available from British Library D...

The effect of fibre-bundling on the mechanical properties of a short-fibre composite

Mulligan, D.R.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN034478 / BLDSC - British Library D...

Influence of rolling and cooling process on microstructure and properties of C-Mn steel treated with Al-Ti-CaSi combined addition

Ye, S.
Ding, W.
Fang, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Chinese (Gangtie 1988 v. 23(9) p. 31-35)SIGLEAvailable from British Library Document...

Deformation of undirectional fibre-reinforced composite induced by temperature change and external loading

Yano, T.
Omori, M
Yanagisawa, O.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

60.00; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1988 v. 52(2) p. 229-235)SIGLEAvailable f...

Fracture behaviour of silicon-carbide fibre-reinforced aluminium alloys

Towata, S.
Yamada, S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1986 v. 50(3) p. 336-341)SIGLEAvailable f...

Mechanical properties of GFRP composite materials at cryogenic temperatures

Takaai, T.
Sano, K.
Fukushima, E
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Zairyo 1988 v. 37(421) p. 1185-1190)Available from British Library Documen...

Manufacture and properties of fibre reinforced metal composites

Okura, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

55.00; Translated from Japanese (Sosei To Kako 1988 v. 29(326) p. 248-254)Available from British Lib...

Low-temperature impact toughness of Al-Li alloys

Kobayashi, T.
Niinomi, M.
Degawa, K
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Keikinzoku 1987 v. 37(12) p. 816-823)SIGLEAvailable from British Library D...

Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel

Sohn, SS
Lee, BJ
Lee, S
Kwak, JH

September 2013

The effects of Al content on cracking phenomena occurring during cold rolling of ferritic lightweigh...

On the relation between the mechanical properties of carbon fibres and those of composite materials The tensile properties

Matsui, J.
Nomura, S.
Ishii, Y
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

35.00; Translated from Japanese (J. Jpn. Soc. Compos. Mater. 1986 v. 12(3) p. 13-19)SIGLEAvailable f...

Effect of cold-rolling on mechanical properties of Al/alumina short fibre composites

Abstract

Extracted data

Effect of cold-rolling on mechanical properties of Al/alumina short fibre composites

Abstract

Extracted data

Related items

Related items