Development of high-strength steel plates for arctic applications manufactured by the quench-tempering process

Cracking tendency of steel plates produced by thermo-mechanical control process (TMCP)

Komizo, Y.-I
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

35.00; Translated from Japanese (J. Jpn. Weld. Soc. 1986 v. 55(3) p. 33-39)SIGLEAvailable from Briti...

Steels and alloys for high temperature service

Kireev, V.B
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

23.00; Translated from Russian (Zharoprochnye i Zharostoikie Metallicheskie Materialy 1987 p. 40-55)...

Development of high-toughness microalloyed bar steel for hot-forged components without subsequent heat treatment

Shiraga, T.
Matsumoto, K.
Suzuki, S.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kokan Giho 1988 (122) p. 153-160)Available from British Library Doc...

Development of direct quenching equipment for steel plate

Kobayashi, Y
Akiyama, N.
Takahashi, I.
Obanya, Y.
Fukumitsu, H.
Otomo, A.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Japanese (Kobe Res. Dev. 1988 v. 38(1) p. 71-74)SIGLEAvailable from British L...

Nine percent Ni steel plates manufactured by the direct quenching and tempering process

Tagawa, H.
Matsui, K.
Izawa, T.
Watanabe, I.
Suzuki, M.
Tokunaga, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

30.00; Translated from Japanese (Nippon Kokan Tech. Rep. 1986 v. 111 p. 1-8)SIGLEAvailable from Brit...

Development of manufacturing technology for hot-roll bonded titanium clad steel plate

Yanagimoto, R.
Sekimura, K.
Shimazaki, M.
Fukuda, T.
Gomi, H
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

55.00; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1987 v. 26(6) p. 511-513)SIGLEAvailable f...

Production of air hardened and tempered plate of O7Kh3GNMYuA steel

Malafeev, A.S.
Rybkin, A.N.
Tolchina, I.V
Kleiner, L.M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Stal' 1987 (6) p. 83-84)Available from British Library Document Supp...

Development of manufacture of high alloy steel plate

Liska, M
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

30.00; Translated from Czech (Hutn. Listy 1986 (4) p. 252-256)SIGLEAvailable from British Library Do...

Development of low-temperature steel for high-heat-input welding

Ohno, Y.
Okamura, Y.
Ichino, K.
Matsuda, S.
Ideda, K.
Sato, T
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Japanese (Bull. Jpn. Inst. Met. 1985 v. 24(6) p. 521-523)SIGLEAvailable from ...

Development of normalised heavy-section 2.25 Cr-1 Mo steel plates with low susceptibility to weld cold cracking

Tsukamoto, H.
Nagae, M.
Yamada, M.
Sakumoto, K.
Kubota, H.
Tanaka, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

35.00; Translated from Japanese (Nippon Kokan Tech. Rep. 1986 v. 111 p. 9-16)SIGLEAvailable from Bri...

Effects of Quenching and Tempering Heat Treatment Processing on the Microstructure and Properties of High-Strength Hull Steel

Hongmei Zhang
Mingshuai Huo
Zhiqiang Ma
Hui Wu
Guanqiao Su
Lianjie Li
Tao Zhang
Fei Lin
Fenghua Chen
Zhengyi Jiang

May 2022

The construction of heavy polar icebreakers is usually done with special hull steels, which require ...

Recent developments in strengthening and toughening of steels

Maki, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kinzoju Gakkai Kaiho 1988 v. 27(8) p. 623-630)SIGLEAvailable from B...

Increasing the strength of high-Mn non-magnetic steel by warm working (study of high-strength non-magnetic steel)

Fujita, M.
Kawamura, E.
Nakasato, F.
Nishimura, S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

35.00; Translated from Japanese (Sumitomo Met. 1986 v. 38(3) p. 1-8)SIGLEAvailable from British Libr...

Development of heavy-gauge TS = 60 kgf/mm2 class steel plate with low yield ratio for architecture use

Shikanai, N.
Sakui, S.
Tagawa, H.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kokan Giho 1988 (122) p. 5-10)Available from British Library Docume...

Study on mechanical properties of 16Mn steel plates produced by controlled rolling and controlled cooling

Li, W.
Bai, X
Fang, B.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Chinese (Gangtie 1988 v. 23(3) p. 28-31)SIGLEAvailable from British Library Document...

Cracking tendency of steel plates produced by thermo-mechanical control process (TMCP)

Komizo, Y.-I
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

35.00; Translated from Japanese (J. Jpn. Weld. Soc. 1986 v. 55(3) p. 33-39)SIGLEAvailable from Briti...

Steels and alloys for high temperature service

Kireev, V.B
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

23.00; Translated from Russian (Zharoprochnye i Zharostoikie Metallicheskie Materialy 1987 p. 40-55)...

Development of high-toughness microalloyed bar steel for hot-forged components without subsequent heat treatment

Shiraga, T.
Matsumoto, K.
Suzuki, S.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kokan Giho 1988 (122) p. 153-160)Available from British Library Doc...

Development of direct quenching equipment for steel plate

Kobayashi, Y
Akiyama, N.
Takahashi, I.
Obanya, Y.
Fukumitsu, H.
Otomo, A.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

46.50; Translated from Japanese (Kobe Res. Dev. 1988 v. 38(1) p. 71-74)SIGLEAvailable from British L...

Nine percent Ni steel plates manufactured by the direct quenching and tempering process

Tagawa, H.
Matsui, K.
Izawa, T.
Watanabe, I.
Suzuki, M.
Tokunaga, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

30.00; Translated from Japanese (Nippon Kokan Tech. Rep. 1986 v. 111 p. 1-8)SIGLEAvailable from Brit...

Development of manufacturing technology for hot-roll bonded titanium clad steel plate

Yanagimoto, R.
Sekimura, K.
Shimazaki, M.
Fukuda, T.
Gomi, H
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

55.00; Translated from Japanese (Nippon Kinzoku Gakkai-Shi 1987 v. 26(6) p. 511-513)SIGLEAvailable f...

Production of air hardened and tempered plate of O7Kh3GNMYuA steel

Malafeev, A.S.
Rybkin, A.N.
Tolchina, I.V
Kleiner, L.M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Stal' 1987 (6) p. 83-84)Available from British Library Document Supp...

Development of manufacture of high alloy steel plate

Liska, M
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

30.00; Translated from Czech (Hutn. Listy 1986 (4) p. 252-256)SIGLEAvailable from British Library Do...

Development of low-temperature steel for high-heat-input welding

Ohno, Y.
Okamura, Y.
Ichino, K.
Matsuda, S.
Ideda, K.
Sato, T
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Japanese (Bull. Jpn. Inst. Met. 1985 v. 24(6) p. 521-523)SIGLEAvailable from ...

Development of normalised heavy-section 2.25 Cr-1 Mo steel plates with low susceptibility to weld cold cracking

Tsukamoto, H.
Nagae, M.
Yamada, M.
Sakumoto, K.
Kubota, H.
Tanaka, A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

35.00; Translated from Japanese (Nippon Kokan Tech. Rep. 1986 v. 111 p. 9-16)SIGLEAvailable from Bri...

Effects of Quenching and Tempering Heat Treatment Processing on the Microstructure and Properties of High-Strength Hull Steel

Hongmei Zhang
Mingshuai Huo
Zhiqiang Ma
Hui Wu
Guanqiao Su
Lianjie Li
Tao Zhang
Fei Lin
Fenghua Chen
Zhengyi Jiang

May 2022

The construction of heavy polar icebreakers is usually done with special hull steels, which require ...

Recent developments in strengthening and toughening of steels

Maki, T
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kinzoju Gakkai Kaiho 1988 v. 27(8) p. 623-630)SIGLEAvailable from B...

Increasing the strength of high-Mn non-magnetic steel by warm working (study of high-strength non-magnetic steel)

Fujita, M.
Kawamura, E.
Nakasato, F.
Nishimura, S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

35.00; Translated from Japanese (Sumitomo Met. 1986 v. 38(3) p. 1-8)SIGLEAvailable from British Libr...

Development of heavy-gauge TS = 60 kgf/mm2 class steel plate with low yield ratio for architecture use

Shikanai, N.
Sakui, S.
Tagawa, H.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kokan Giho 1988 (122) p. 5-10)Available from British Library Docume...

Study on mechanical properties of 16Mn steel plates produced by controlled rolling and controlled cooling

Li, W.
Bai, X
Fang, B.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Chinese (Gangtie 1988 v. 23(3) p. 28-31)SIGLEAvailable from British Library Document...

Cracking tendency of steel plates produced by thermo-mechanical control process (TMCP)

Komizo, Y.-I
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

35.00; Translated from Japanese (J. Jpn. Weld. Soc. 1986 v. 55(3) p. 33-39)SIGLEAvailable from Briti...

Steels and alloys for high temperature service

Kireev, V.B
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1988

23.00; Translated from Russian (Zharoprochnye i Zharostoikie Metallicheskie Materialy 1987 p. 40-55)...

Development of high-toughness microalloyed bar steel for hot-forged components without subsequent heat treatment

Shiraga, T.
Matsumoto, K.
Suzuki, S.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Japanese (Nippon Kokan Giho 1988 (122) p. 153-160)Available from British Library Doc...

Development of high-strength steel plates for arctic applications manufactured by the quench-tempering process

Abstract

Extracted data

Development of high-strength steel plates for arctic applications manufactured by the quench-tempering process

Abstract

Extracted data

Related items

Related items