Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films

Static compression test of materials

Liu, Chao

January 2021

Static compression test is one of fundamental experiments to test materials’ properties, such as Yie...

Determination of elastic modulus of thin layer - numerical study of microcompressive test and the bulge test

Petráčková, Klára

January 2013

Determination of mechanical properties of very thin films is rather difficult task as all of current...

The triaxial compression testing of powder in the low stress region

Komura, S.
Miyanami, K
Terashita, K.
British Gas Corp., London (United Kingdom)

Translated from Japanese (J. Soc. Powder Tech. Jpn. 1985 v. 22(1) p. 11-16)Available from British Li...

Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films

Sutcliffe, Michael P.F.
Combarieu, Robert
Repoux, Monique
Montmitonnet, Pierre

January 2003

International audienceAn experimental investigation of the tribology during plane strain compression...

Measuring flow stress in plane strain compression tests

Loveday, M.
Mahon, G.
Roebuck, B.
National Physical Lab., Teddington (United Kingdom)

January 2000

Produced as part of the Materials Measurement programmeAvailable from British Library Document Suppl...

Tribological charactristics of coatings on aluminium and its alloys

Abdul-Mahdi, F.S

January 1987

Available from British Library Document Supply Centre- DSC:DX81393 / BLDSC - British Library Documen...

A COMPRESSION TESTING TECHNIQUE AT HIGH RATES OF STRAIN FOR SHEET METALS

Y. SATO
S. MATSUI
M. KOBAYASHI
H. TAKAHASHI

January 1988

On a déterminé les courbes contrainte-déformation de tôles métalliques à grande vitesse de déformati...

Measuring flow stress in hot axisymmetric compression tests

Roebuck, B.
National Physical Laboratory (Great Britain) (United Kingdom)

January 2002

Includes bibliographical referencesAvailable from British Library Document Supply Centre- DSC:5413. ...

Measuring Stress Strain Curves to Large Strains on Sheet Metal

Bacha, Alexis
Feuerstein, Matthieu
Desrayaud, Christophe
Klöcker, Helmut

March 2007

International audienceThe stress-strain response of aluminium sheet has been determined by a novel p...

Thin film strain gauging of engineering components

Gray, D.
Wood, M.
Lamb, P
ERA Technology Ltd., Leatherhead (United Kingdom)

January 1992

Final reportAvailable from British Library Document Supply Centre-DSC:3794.870(ERA--92-0726) / BLDSC...

Hot plane strain compression testing of aluminum alloys by channel-die compression

Maurice, Claire
Piot, David
Klöcker, Helmut
Driver, Julian, H.

April 2005

International audienceA thoroughly tested, high-temperature channel-die compression (CDC) rig is des...

Stress-strain data for aluminum 6061-T651 from 9 lots at 6 temperatures under uniaxial and plain strain tension

Shields, M (via Mendeley Data)

June 2019

This dataset contains engineering stress-engineering strain curves for aluminum 6061-T651 test speci...

Plane strain fracture toughness test procedures for particulate metal matrix composites

Lord, J
Roebuck, B.
National Physical Lab., Teddington (United Kingdom). Div. of Materials Metrology

January 1990

Available from British Library Document Supply Centre- DSC:6029.3343(NPL-DMM(A)--3) / BLDSC - Britis...

Optical techniques for in-plane strain analysis in an industrial environment

Parker, R.J
Brownell, J.B.
Rolls-Royce plc. (United Kingdom)

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:8019.3153(RRR-PNR--90601) / BLDSC - ...

Stress-strain curves of aluminum 6061-T651 from 9 lots at 6 temperatures under uniaxial and plain strain tension

Bangalore Satish, A

This dataset contains engineering stress-engineering strain curves of aluminum 6061-T651 test specim...

Static compression test of materials

Liu, Chao

January 2021

Static compression test is one of fundamental experiments to test materials’ properties, such as Yie...

Determination of elastic modulus of thin layer - numerical study of microcompressive test and the bulge test

Petráčková, Klára

January 2013

Determination of mechanical properties of very thin films is rather difficult task as all of current...

The triaxial compression testing of powder in the low stress region

Komura, S.
Miyanami, K
Terashita, K.
British Gas Corp., London (United Kingdom)

Translated from Japanese (J. Soc. Powder Tech. Jpn. 1985 v. 22(1) p. 11-16)Available from British Li...

Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films

Sutcliffe, Michael P.F.
Combarieu, Robert
Repoux, Monique
Montmitonnet, Pierre

January 2003

International audienceAn experimental investigation of the tribology during plane strain compression...

Measuring flow stress in plane strain compression tests

Loveday, M.
Mahon, G.
Roebuck, B.
National Physical Lab., Teddington (United Kingdom)

January 2000

Produced as part of the Materials Measurement programmeAvailable from British Library Document Suppl...

Tribological charactristics of coatings on aluminium and its alloys

Abdul-Mahdi, F.S

January 1987

Available from British Library Document Supply Centre- DSC:DX81393 / BLDSC - British Library Documen...

A COMPRESSION TESTING TECHNIQUE AT HIGH RATES OF STRAIN FOR SHEET METALS

Y. SATO
S. MATSUI
M. KOBAYASHI
H. TAKAHASHI

January 1988

On a déterminé les courbes contrainte-déformation de tôles métalliques à grande vitesse de déformati...

Measuring flow stress in hot axisymmetric compression tests

Roebuck, B.
National Physical Laboratory (Great Britain) (United Kingdom)

January 2002

Includes bibliographical referencesAvailable from British Library Document Supply Centre- DSC:5413. ...

Measuring Stress Strain Curves to Large Strains on Sheet Metal

Bacha, Alexis
Feuerstein, Matthieu
Desrayaud, Christophe
Klöcker, Helmut

March 2007

International audienceThe stress-strain response of aluminium sheet has been determined by a novel p...

Thin film strain gauging of engineering components

Gray, D.
Wood, M.
Lamb, P
ERA Technology Ltd., Leatherhead (United Kingdom)

January 1992

Final reportAvailable from British Library Document Supply Centre-DSC:3794.870(ERA--92-0726) / BLDSC...

Hot plane strain compression testing of aluminum alloys by channel-die compression

Maurice, Claire
Piot, David
Klöcker, Helmut
Driver, Julian, H.

April 2005

International audienceA thoroughly tested, high-temperature channel-die compression (CDC) rig is des...

Stress-strain data for aluminum 6061-T651 from 9 lots at 6 temperatures under uniaxial and plain strain tension

Shields, M (via Mendeley Data)

June 2019

This dataset contains engineering stress-engineering strain curves for aluminum 6061-T651 test speci...

Plane strain fracture toughness test procedures for particulate metal matrix composites

Lord, J
Roebuck, B.
National Physical Lab., Teddington (United Kingdom). Div. of Materials Metrology

January 1990

Available from British Library Document Supply Centre- DSC:6029.3343(NPL-DMM(A)--3) / BLDSC - Britis...

Optical techniques for in-plane strain analysis in an industrial environment

Parker, R.J
Brownell, J.B.
Rolls-Royce plc. (United Kingdom)

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:8019.3153(RRR-PNR--90601) / BLDSC - ...

Stress-strain curves of aluminum 6061-T651 from 9 lots at 6 temperatures under uniaxial and plain strain tension

Bangalore Satish, A

This dataset contains engineering stress-engineering strain curves of aluminum 6061-T651 test specim...

Static compression test of materials

Liu, Chao

January 2021

Static compression test is one of fundamental experiments to test materials’ properties, such as Yie...

Determination of elastic modulus of thin layer - numerical study of microcompressive test and the bulge test

Petráčková, Klára

January 2013

Determination of mechanical properties of very thin films is rather difficult task as all of current...

The triaxial compression testing of powder in the low stress region

Komura, S.
Miyanami, K
Terashita, K.
British Gas Corp., London (United Kingdom)

Translated from Japanese (J. Soc. Powder Tech. Jpn. 1985 v. 22(1) p. 11-16)Available from British Li...

Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films

Abstract

Extracted data

Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films

Abstract

Extracted data

Related items

Related items