Determination of pressure of lubricant in geometric deformation zone during extrusion

Determination of limit stresses and strains during stamp-drawing

Belosevich, V.K.
Rudasev, V.B
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

15.00; Translated from Russian (Izv. Uchebn. Zaved., Chern. Metall. 1986 (7) p. 61-65)SIGLEAvailable...

Kinematic and deformation characteristics of elongation

Getiya, I.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 62-65)SIGLEAvailable...

Installation for investigating interstand strain in continuous rolling

Vydrin, V.
Krainov, V.
Kropachev, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1989 (2) p. 55-57)Available from...

Stress strain state during hydraulic extrusion of tubes

Balakin, V.F.
Kuz'menko, V.I.
Fen', G.A.
Korzh, A.P.
Shlyakhturov, A.Yu
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 75-77)SIGLEA...

Theory of contact stresses during deformation of materials by compression

Grekov, A.M
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1986

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (5) p. 90-94)SIGLEAvailable...

Influence of lubricant-coolant flowrate on distribution of tension in the strip

Kuznetsov, L.A.
Blyumin, S.L.
Bozhkov, A.I.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Stal, 1988 (7) p. 54-58)Available from British Library Document Supply Cent...

Determination of contact pressure during rolling with crossed work rolls

Kapnin, V.V.
Khloponin, V.N
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 149)SIGLEAvailable f...

Roll pressure during rolling with work hardening and tensioning of strip Report 2

Starchenko, D.I.
Kaplanov, V.I.
Shenyakin
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (6) p. 70-74)SIGLEAv...

Determination of thickness of lubricant layer during drawing

Zykov, Yu.S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (4) p. 52-53)SIGLEAv...

Indirect determination of tension during continuous rolling of thick sections

Vydrin, V.N.
Sychev, V.A.
Fedosienko, A.S.
Cheredinov, M.N.
Geis, A.R
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

15.00 Translated from Russian (Isv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (2) p. 82-85)Availabl...

Intensity of pressure at right-angles during high-speed forging of half-torus from flat-sided annular billet

Peretyat'ko, V.N.
Bazaikin, V.I.
Pikover, Yu.B
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1985 (4) p. 55-59)SIGLEAv...

Technological parameters of drawing in tool with two hydrodynamic lubrication zones

Nikolaev, V.A.
Vasil'ev, A.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1984 (12) p. 50-52)SIGLEAvailabl...

The pressure of gas in the wall of a nonmetallic mould during casting

Serebro, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Protsessy Lit'ya 1999 (1) p. 73-77)Available from British Library Document ...

Calculation of contact stresses in wedge-press welding

Kucheryaev, P.
Lukin, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Svar. Proiz. 2000 36 (3) p. 13-19)SIGLEAvailable from British Library Docum...

Hardening of metal during production of bent shapes

Seredenko, S.Ya.
Klepanda, V.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (12) p. 66-69)SIGLEAvailable from British Library Document Suppl...

Determination of limit stresses and strains during stamp-drawing

Belosevich, V.K.
Rudasev, V.B
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

15.00; Translated from Russian (Izv. Uchebn. Zaved., Chern. Metall. 1986 (7) p. 61-65)SIGLEAvailable...

Kinematic and deformation characteristics of elongation

Getiya, I.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 62-65)SIGLEAvailable...

Installation for investigating interstand strain in continuous rolling

Vydrin, V.
Krainov, V.
Kropachev, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1989 (2) p. 55-57)Available from...

Stress strain state during hydraulic extrusion of tubes

Balakin, V.F.
Kuz'menko, V.I.
Fen', G.A.
Korzh, A.P.
Shlyakhturov, A.Yu
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 75-77)SIGLEA...

Theory of contact stresses during deformation of materials by compression

Grekov, A.M
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1986

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (5) p. 90-94)SIGLEAvailable...

Influence of lubricant-coolant flowrate on distribution of tension in the strip

Kuznetsov, L.A.
Blyumin, S.L.
Bozhkov, A.I.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Stal, 1988 (7) p. 54-58)Available from British Library Document Supply Cent...

Determination of contact pressure during rolling with crossed work rolls

Kapnin, V.V.
Khloponin, V.N
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 149)SIGLEAvailable f...

Roll pressure during rolling with work hardening and tensioning of strip Report 2

Starchenko, D.I.
Kaplanov, V.I.
Shenyakin
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (6) p. 70-74)SIGLEAv...

Determination of thickness of lubricant layer during drawing

Zykov, Yu.S
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1987 (4) p. 52-53)SIGLEAv...

Indirect determination of tension during continuous rolling of thick sections

Vydrin, V.N.
Sychev, V.A.
Fedosienko, A.S.
Cheredinov, M.N.
Geis, A.R
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

15.00 Translated from Russian (Isv. Vyssh. Uchebn. Zaved., Chern. Metall. 1988 (2) p. 82-85)Availabl...

Intensity of pressure at right-angles during high-speed forging of half-torus from flat-sided annular billet

Peretyat'ko, V.N.
Bazaikin, V.I.
Pikover, Yu.B
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1985 (4) p. 55-59)SIGLEAv...

Technological parameters of drawing in tool with two hydrodynamic lubrication zones

Nikolaev, V.A.
Vasil'ev, A.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1984 (12) p. 50-52)SIGLEAvailabl...

The pressure of gas in the wall of a nonmetallic mould during casting

Serebro, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Protsessy Lit'ya 1999 (1) p. 73-77)Available from British Library Document ...

Calculation of contact stresses in wedge-press welding

Kucheryaev, P.
Lukin, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Svar. Proiz. 2000 36 (3) p. 13-19)SIGLEAvailable from British Library Docum...

Hardening of metal during production of bent shapes

Seredenko, S.Ya.
Klepanda, V.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (12) p. 66-69)SIGLEAvailable from British Library Document Suppl...

Determination of limit stresses and strains during stamp-drawing

Belosevich, V.K.
Rudasev, V.B
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1987

15.00; Translated from Russian (Izv. Uchebn. Zaved., Chern. Metall. 1986 (7) p. 61-65)SIGLEAvailable...

Kinematic and deformation characteristics of elongation

Getiya, I.G
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (9) p. 62-65)SIGLEAvailable...

Installation for investigating interstand strain in continuous rolling

Vydrin, V.
Krainov, V.
Kropachev, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1989 (2) p. 55-57)Available from...

Determination of pressure of lubricant in geometric deformation zone during extrusion

Abstract

Extracted data

Determination of pressure of lubricant in geometric deformation zone during extrusion

Abstract

Extracted data

Related items

Related items