Effect of the degree and velocity of metalworking on the forming strength of alloys Al99.5 and AlMg5 during single-step cold deformation

Effect of strain rate on hot formability of steels

Strakos, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1985

14.00; Translated from Czech (Hutn. Listy 1985 v. 40(6) p. 396-400)SIGLEAvailable from British Libra...

Influence of various factors on structure and ductility of KhN56VMTYu alloy

Bulavina, L.S.
Mel'kumov, I.N.
Savel'eva, I.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Stal' 1987 (11) p. 85-87)SIGLEAvailable from British Library Documen...

Effect of modifying additions on the ductility and plastic properties and brittle strength of cold-resistant low-alloy steels

Makarenko, V.
Belyaev, V.
Galichenko, E.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Svar. Proizvod. 2000 (8) p. 7-13)Available from British Library Document Su...

Theoretical and experimental investigation of the cold deformation of rolled steels

Horogh, L.
Zupko, I.
Toth, L.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Hungarian (Banyasz. Kohasz. Lapok, Kohasz. 1987 v. 120(8-9) p. 362-364)Available fro...

Effect of plastic deformation on the properties of forging VAD15 aluminium alloy and welded joints in this alloy

Lukin, V.
Arzamasov, V.
Iod, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Russian (Svar. Proizvod. 1999 36(11) p.6-8)SIGLEAvailable from British Library Docum...

Effect of plastic deformation on the properties of Al-Zn-Mn-Cu alloy

Brucil, P.
Mazek, F.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles University, Prague, 1997)Availa...

Influence of cold deformation on austenitization of eutectoid steel

Baranov, A.A.
Kim, I.E
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (10) p. 77-81)SIGLEA...

Effect of processing factors on properties of Al-Mg-Si alloys

Placek, K
Nemethova, L.
Grutkova, J.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Czech. (Hutn. Listy 1986 (6) p. 407-411)Available from British Library Docume...

The effect of annealing temperature and cold strain on the structure of dispersion-hardened system Al-Al_4C_3

Durisin, J.
Besterci, M.
Orolinova, M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Czech. (Pokroky Praskove Metal. 1988 (4) p. 19-28)SIGLEAvailable from British Librar...

Grain refining of aluminium alloys in the Szekesfehervar Light Metals Works

Limpar, I.
Stein, M
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

20.50; Translated from Hungarian (Banyasz. Kohasz. Lapok (Kohasz.) 1983 v. 116(7) p. 319-324)SIGLEAv...

Plastic deformation in Al-Zn-Mg-Cu alloy

Malek, P.
Brazdilova, D.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles Univ., Prague, Czech Republic, ...

Effect of the thermophysical parameters of the frozen mould on the casting properties of aluminium alloys

Vasil'ev, I.
Korniets, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Protsessy Lit'ya 1999 (2) p. 76-80)Available from British Library Document ...

Development and prospects of aluminium metallurgy in Hungary

Sillinger, N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Hungarian (Banyasz. Kohasz. Lapok, Kohasz. 1986 v. 119(6) p. 183-188)SIGLEAva...

Effect of plastic deformation on Young's modulus of metals

Drapkin, B.M.
Zamyatin, Y.
Vinogradov, V.E.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1989

Translated from Russian (Fiz. Khim. Obrab. Mater. 1988 v. 22(4) p. 127-131)Available from British Li...

Hardening of metal during production of bent shapes

Seredenko, S.Ya.
Klepanda, V.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (12) p. 66-69)SIGLEAvailable from British Library Document Suppl...

Effect of strain rate on hot formability of steels

Strakos, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1985

14.00; Translated from Czech (Hutn. Listy 1985 v. 40(6) p. 396-400)SIGLEAvailable from British Libra...

Influence of various factors on structure and ductility of KhN56VMTYu alloy

Bulavina, L.S.
Mel'kumov, I.N.
Savel'eva, I.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Stal' 1987 (11) p. 85-87)SIGLEAvailable from British Library Documen...

Effect of modifying additions on the ductility and plastic properties and brittle strength of cold-resistant low-alloy steels

Makarenko, V.
Belyaev, V.
Galichenko, E.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Svar. Proizvod. 2000 (8) p. 7-13)Available from British Library Document Su...

Theoretical and experimental investigation of the cold deformation of rolled steels

Horogh, L.
Zupko, I.
Toth, L.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Hungarian (Banyasz. Kohasz. Lapok, Kohasz. 1987 v. 120(8-9) p. 362-364)Available fro...

Effect of plastic deformation on the properties of forging VAD15 aluminium alloy and welded joints in this alloy

Lukin, V.
Arzamasov, V.
Iod, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Russian (Svar. Proizvod. 1999 36(11) p.6-8)SIGLEAvailable from British Library Docum...

Effect of plastic deformation on the properties of Al-Zn-Mn-Cu alloy

Brucil, P.
Mazek, F.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles University, Prague, 1997)Availa...

Influence of cold deformation on austenitization of eutectoid steel

Baranov, A.A.
Kim, I.E
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (10) p. 77-81)SIGLEA...

Effect of processing factors on properties of Al-Mg-Si alloys

Placek, K
Nemethova, L.
Grutkova, J.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Czech. (Hutn. Listy 1986 (6) p. 407-411)Available from British Library Docume...

The effect of annealing temperature and cold strain on the structure of dispersion-hardened system Al-Al_4C_3

Durisin, J.
Besterci, M.
Orolinova, M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Czech. (Pokroky Praskove Metal. 1988 (4) p. 19-28)SIGLEAvailable from British Librar...

Grain refining of aluminium alloys in the Szekesfehervar Light Metals Works

Limpar, I.
Stein, M
Metals Society (Montserrat), London (United Kingdom). British Industrial and Scientific International Translation Service

January 1985

20.50; Translated from Hungarian (Banyasz. Kohasz. Lapok (Kohasz.) 1983 v. 116(7) p. 319-324)SIGLEAv...

Plastic deformation in Al-Zn-Mg-Cu alloy

Malek, P.
Brazdilova, D.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles Univ., Prague, Czech Republic, ...

Effect of the thermophysical parameters of the frozen mould on the casting properties of aluminium alloys

Vasil'ev, I.
Korniets, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Protsessy Lit'ya 1999 (2) p. 76-80)Available from British Library Document ...

Development and prospects of aluminium metallurgy in Hungary

Sillinger, N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Hungarian (Banyasz. Kohasz. Lapok, Kohasz. 1986 v. 119(6) p. 183-188)SIGLEAva...

Effect of plastic deformation on Young's modulus of metals

Drapkin, B.M.
Zamyatin, Y.
Vinogradov, V.E.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1989

Translated from Russian (Fiz. Khim. Obrab. Mater. 1988 v. 22(4) p. 127-131)Available from British Li...

Hardening of metal during production of bent shapes

Seredenko, S.Ya.
Klepanda, V.V
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Stal' 1986 (12) p. 66-69)SIGLEAvailable from British Library Document Suppl...

Effect of strain rate on hot formability of steels

Strakos, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1985

14.00; Translated from Czech (Hutn. Listy 1985 v. 40(6) p. 396-400)SIGLEAvailable from British Libra...

Influence of various factors on structure and ductility of KhN56VMTYu alloy

Bulavina, L.S.
Mel'kumov, I.N.
Savel'eva, I.N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Russian (Stal' 1987 (11) p. 85-87)SIGLEAvailable from British Library Documen...

Effect of modifying additions on the ductility and plastic properties and brittle strength of cold-resistant low-alloy steels

Makarenko, V.
Belyaev, V.
Galichenko, E.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Svar. Proizvod. 2000 (8) p. 7-13)Available from British Library Document Su...

Effect of the degree and velocity of metalworking on the forming strength of alloys Al99.5 and AlMg5 during single-step cold deformation

Abstract

Extracted data

Effect of the degree and velocity of metalworking on the forming strength of alloys Al99.5 and AlMg5 during single-step cold deformation

Abstract

Extracted data

Related items

Related items