Quantitative metallographic analysis of the microstructure of an Al-Cu-Li-Zr alloy

Mechanical properties of Mg-Li-Al alloys reinforced by short saffil fibres

Trojanova, Z.
Kudela, S.
Lukac, P.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Kovove Mater. 2001 (1) p. 1-9)SIGLEAvailable from British Library Document Su...

Properties of formed Al-alloys in as-cast state

Pelcman, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Hutnik (Prague) 1987 v. 37(7) p. 270-276)Available from British Librar...

Microstructure and properties of certain 2000 series aluminium alloys

Wang, L.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN034540 / BLDSC - British Library D...

Electron microscopic analysis of Al-Mn quasicrystalline alloys

Billy, J.
Makroczy, P.
Karel, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

26.00; Translated from Czech. (Kovove Mater. 1990 v. 28(1) p. 119-128)SIGLEAvailable from British Li...

Structure and properties of melt-spun Al-Zr-Ti alloys 2: the solidification microstructure and microhardness

Malek, P.
Janecek, M.
Smola, B.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Czech. (Kovove Mater., 2000 (1) p. 9-20)SIGLEAvailable from British Library Document...

Analysis of intermetallic phases in wrought aluminium alloy prepared by recycling of composite scrap

Pelachova, T.
Lapin, J.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Czech (Kovove Mater. 1999 (6) p. 399-410)Available from British Library Document Sup...

Microstructural and textural characterisation of commercial aluminium-lithium aerospace alloys

Wismayer, S

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX172498 / BLDSC - British Library D...

Plastic deformation in Al-Zn-Mg-Cu alloy

Malek, P.
Brazdilova, D.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles Univ., Prague, Czech Republic, ...

Assessing the mechanical properties of Cr13Ni6Mo steel by analyzing its macrostructure

Slovak, S.
Moravec, J.
Kalas, P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Czech. (Slevarenstvi 1985 (7) p. 279-282)SIGLEAvailable from British Library ...

A model of formation of microcracks in AlCu4Mg1 alloy

Sedlacek, V
Ruscak, M.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

16.00; Translated from Czech (Strojirenstvi 1986 v. 36(3) p. 160-165)Available from British Library ...

Development of aluminium alloys (review)

Sedlacek, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Czech (Kovove Mater. 1997 (2) p. 65-94)SIGLEAvailable from British Library Document ...

Modern methods of analytic electron microscopy in metallurgy

Longauer, S.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept 2001)SIGLEAvailabl...

Metallographic and fractographic analysis of joints between tin-plated copper leads and aluminium bodies of electrolytic capacitors

Benko, B.
Grgac, P.
Kmety, M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Slovak (Zvaranie 1989 v. 38(2) p. 40-44)Available from British Library Document Supp...

Aluminium alloys on the basis of Al-Cu-Mg, lead-free, intended for cutting

Faltus, J.
Slama, P.
Stulikova, I. (and others)
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proc. Aluminium-2001, Decin, Czech Republic, September 2001)Available from Br...

Thermal analysis of foundry aluminium alloys

Koreny, R.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept. 2001)Available fr...

Mechanical properties of Mg-Li-Al alloys reinforced by short saffil fibres

Trojanova, Z.
Kudela, S.
Lukac, P.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Kovove Mater. 2001 (1) p. 1-9)SIGLEAvailable from British Library Document Su...

Properties of formed Al-alloys in as-cast state

Pelcman, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Hutnik (Prague) 1987 v. 37(7) p. 270-276)Available from British Librar...

Microstructure and properties of certain 2000 series aluminium alloys

Wang, L.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN034540 / BLDSC - British Library D...

Electron microscopic analysis of Al-Mn quasicrystalline alloys

Billy, J.
Makroczy, P.
Karel, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

26.00; Translated from Czech. (Kovove Mater. 1990 v. 28(1) p. 119-128)SIGLEAvailable from British Li...

Structure and properties of melt-spun Al-Zr-Ti alloys 2: the solidification microstructure and microhardness

Malek, P.
Janecek, M.
Smola, B.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Czech. (Kovove Mater., 2000 (1) p. 9-20)SIGLEAvailable from British Library Document...

Analysis of intermetallic phases in wrought aluminium alloy prepared by recycling of composite scrap

Pelachova, T.
Lapin, J.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Czech (Kovove Mater. 1999 (6) p. 399-410)Available from British Library Document Sup...

Microstructural and textural characterisation of commercial aluminium-lithium aerospace alloys

Wismayer, S

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX172498 / BLDSC - British Library D...

Plastic deformation in Al-Zn-Mg-Cu alloy

Malek, P.
Brazdilova, D.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Czech (Report of the Dept. of Metal Physics, Charles Univ., Prague, Czech Republic, ...

Assessing the mechanical properties of Cr13Ni6Mo steel by analyzing its macrostructure

Slovak, S.
Moravec, J.
Kalas, P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1988

15.00; Translated from Czech. (Slevarenstvi 1985 (7) p. 279-282)SIGLEAvailable from British Library ...

A model of formation of microcracks in AlCu4Mg1 alloy

Sedlacek, V
Ruscak, M.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

16.00; Translated from Czech (Strojirenstvi 1986 v. 36(3) p. 160-165)Available from British Library ...

Development of aluminium alloys (review)

Sedlacek, V.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Czech (Kovove Mater. 1997 (2) p. 65-94)SIGLEAvailable from British Library Document ...

Modern methods of analytic electron microscopy in metallurgy

Longauer, S.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept 2001)SIGLEAvailabl...

Metallographic and fractographic analysis of joints between tin-plated copper leads and aluminium bodies of electrolytic capacitors

Benko, B.
Grgac, P.
Kmety, M.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Slovak (Zvaranie 1989 v. 38(2) p. 40-44)Available from British Library Document Supp...

Aluminium alloys on the basis of Al-Cu-Mg, lead-free, intended for cutting

Faltus, J.
Slama, P.
Stulikova, I. (and others)
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proc. Aluminium-2001, Decin, Czech Republic, September 2001)Available from Br...

Thermal analysis of foundry aluminium alloys

Koreny, R.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept. 2001)Available fr...

Mechanical properties of Mg-Li-Al alloys reinforced by short saffil fibres

Trojanova, Z.
Kudela, S.
Lukac, P.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Kovove Mater. 2001 (1) p. 1-9)SIGLEAvailable from British Library Document Su...

Properties of formed Al-alloys in as-cast state

Pelcman, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Hutnik (Prague) 1987 v. 37(7) p. 270-276)Available from British Librar...

Microstructure and properties of certain 2000 series aluminium alloys

Wang, L.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN034540 / BLDSC - British Library D...

Quantitative metallographic analysis of the microstructure of an Al-Cu-Li-Zr alloy

Abstract

Extracted data

Quantitative metallographic analysis of the microstructure of an Al-Cu-Li-Zr alloy

Abstract

Extracted data

Related items

Related items