The effect of carbon and oxygen on microstructure and mechanical properties of Ti-25V-15Cr-2Al(wt%) alloys

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit

Yan, M.
Qian, M.
Kong, C.
Dargusch, M. S.

February 2014

The formation of grain boundary (GB) brittle carbides with a complex three-dimensional (3-D) morphol...

The effect of oxygen on the mechanical properties of a B.C.C. titanium alloy.

Rosenberg, William David

January 1972

Massachusetts Institute of Technology. Dept. of Metallurgy and Materials Science. Thesis. 1972. Sc.D...

Effect of heat treatment on microstructure and mechanical properties of Ti-5wt-%Ni alloys for use as biomaterial

Cascadan, Daniela
Buzalaf, M. A. R.
Grandini, Carlos Roberto

January 2014

Titanium alloys are among the most important and frequently used class of biomaterials. In addition ...

The effect of carbon and oxygen on microstructure and mechanical properties of Ti-25V-Cr-sAl (wt%) alloys

Li, Y.
Blenkinsop, P.
Loretto, M.
Rolls-Royce plc (United Kingdom)

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(92565) / BLDSC - British Lib...

Effect of heat treatment and exposure on microstructure and mechanical properties of Ti-25V-15Cr-2Al (wt%) alloys containing carbon

Li, Y.
Loretto, M.
Rugg, D.
Rolls-Royce plc (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(no 92798) / BLDSC - British ...

Effect of Carbon Content on the Microstructure and Properties of Ti-6Al-4V Alloy

Szkliniarz, A.
Szkliniarz, W.

January 2020

The article shows the effect of the increased carbon content on the microstructure and properties of...

Microstructure and strength of Ti-15 wt. % Mo alloy

Pennock, G

January 1980

SIGLEAvailable from British Library Document Supply Centre- DSC:D35468/81 / BLDSC - British Library ...

Influence of Oxygen Content and Microstructure on the Mechanical Properties and Biocompatibility of Ti–15 wt%Mo Alloy Used for Biomedical Applications

José R. S. Martins, Jr.
Raul O. Araújo
Tatiani A. G. Donato
Victor E. Arana-Chavez
Marília A. R. Buzalaf
Carlos R. Grandini

January 2014

The Ti–15Mo alloy has its mechanical properties strongly altered by heat treatments and by addition ...

Effect of the Oxygen on the Mechanical Properties of Ti-Mo Systems Alloys

Nogueira, R. A.
Grandini, Carlos Roberto

January 2011

Titanium alloys normally contain oxygen, nitrogen, or carbon as impurities, and although this concen...

Effect of oxygen content on the mechanical properties and plastic deformation mechanisms in the TWIP/TRIP Ti–12Mo alloy

Catanio Bortolan C.
Contri Campanelli L.
Paternoster C.
Giguere N.
Brodusch N.
Bolfarini C.
Gauvin R.
Mengucci P.
Barucca G.
Mantovani D.

January 2021

In the last decades, biomaterials have improved the life and its quality for millions around the Glo...

Influence of Oxygen Content and Microstructure on the Mechanical Properties and Biocompatibility of Ti-15 wt%Mo Alloy Used for Biomedical Applications

Martins, Jose R. S.
Araujo, Raul O.
Donato, Tatiani A. G.
Arana-Chavez, Victor E.
Buzalaf, Marilia A. R.
Grandini, Carlos Roberto

January 2014

The Ti-15Mo alloy has its mechanical properties strongly altered by heat treatments and by addition ...

Mechanical properties of titanium alloys

Rolls Royce Ltd., Derby (UK)

January 1981

SIGLELD:6015.42F(N--82-21326)(microfiche) / BLDSC - British Library Document Supply CentreGBUnited K...

Carbon in Commercially Pure Titanium

Agnieszka Szkliniarz
Wojciech Szkliniarz

January 2023

In a way so far unmatched in any single study, this paper presents the complex characteristics of co...

Effect of hydrogen on the mechanical properties of titanium alloys

Ouyang, S

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX182831 / BLDSC - British Library D...

The effect of oxygen, nitrogen and carbon on the microstructure and compression properties of titanium foams

Lefebvre, Louis-Philippe
Baril, Eric
De Camaret, Laurent

May 2013

This paper presents the effect of oxygen, nitrogen, and carbon concentration on the microstructure a...

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit

Yan, M.
Qian, M.
Kong, C.
Dargusch, M. S.

February 2014

The formation of grain boundary (GB) brittle carbides with a complex three-dimensional (3-D) morphol...

The effect of oxygen on the mechanical properties of a B.C.C. titanium alloy.

Rosenberg, William David

January 1972

Massachusetts Institute of Technology. Dept. of Metallurgy and Materials Science. Thesis. 1972. Sc.D...

Effect of heat treatment on microstructure and mechanical properties of Ti-5wt-%Ni alloys for use as biomaterial

Cascadan, Daniela
Buzalaf, M. A. R.
Grandini, Carlos Roberto

January 2014

Titanium alloys are among the most important and frequently used class of biomaterials. In addition ...

The effect of carbon and oxygen on microstructure and mechanical properties of Ti-25V-Cr-sAl (wt%) alloys

Li, Y.
Blenkinsop, P.
Loretto, M.
Rolls-Royce plc (United Kingdom)

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(92565) / BLDSC - British Lib...

Effect of heat treatment and exposure on microstructure and mechanical properties of Ti-25V-15Cr-2Al (wt%) alloys containing carbon

Li, Y.
Loretto, M.
Rugg, D.
Rolls-Royce plc (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(no 92798) / BLDSC - British ...

Effect of Carbon Content on the Microstructure and Properties of Ti-6Al-4V Alloy

Szkliniarz, A.
Szkliniarz, W.

January 2020

The article shows the effect of the increased carbon content on the microstructure and properties of...

Microstructure and strength of Ti-15 wt. % Mo alloy

Pennock, G

January 1980

SIGLEAvailable from British Library Document Supply Centre- DSC:D35468/81 / BLDSC - British Library ...

Influence of Oxygen Content and Microstructure on the Mechanical Properties and Biocompatibility of Ti–15 wt%Mo Alloy Used for Biomedical Applications

José R. S. Martins, Jr.
Raul O. Araújo
Tatiani A. G. Donato
Victor E. Arana-Chavez
Marília A. R. Buzalaf
Carlos R. Grandini

January 2014

The Ti–15Mo alloy has its mechanical properties strongly altered by heat treatments and by addition ...

Effect of the Oxygen on the Mechanical Properties of Ti-Mo Systems Alloys

Nogueira, R. A.
Grandini, Carlos Roberto

January 2011

Titanium alloys normally contain oxygen, nitrogen, or carbon as impurities, and although this concen...

Effect of oxygen content on the mechanical properties and plastic deformation mechanisms in the TWIP/TRIP Ti–12Mo alloy

Catanio Bortolan C.
Contri Campanelli L.
Paternoster C.
Giguere N.
Brodusch N.
Bolfarini C.
Gauvin R.
Mengucci P.
Barucca G.
Mantovani D.

January 2021

In the last decades, biomaterials have improved the life and its quality for millions around the Glo...

Influence of Oxygen Content and Microstructure on the Mechanical Properties and Biocompatibility of Ti-15 wt%Mo Alloy Used for Biomedical Applications

Martins, Jose R. S.
Araujo, Raul O.
Donato, Tatiani A. G.
Arana-Chavez, Victor E.
Buzalaf, Marilia A. R.
Grandini, Carlos Roberto

January 2014

The Ti-15Mo alloy has its mechanical properties strongly altered by heat treatments and by addition ...

Mechanical properties of titanium alloys

Rolls Royce Ltd., Derby (UK)

January 1981

SIGLELD:6015.42F(N--82-21326)(microfiche) / BLDSC - British Library Document Supply CentreGBUnited K...

Carbon in Commercially Pure Titanium

Agnieszka Szkliniarz
Wojciech Szkliniarz

January 2023

In a way so far unmatched in any single study, this paper presents the complex characteristics of co...

Effect of hydrogen on the mechanical properties of titanium alloys

Ouyang, S

January 1992

SIGLEAvailable from British Library Document Supply Centre- DSC:DX182831 / BLDSC - British Library D...

The effect of oxygen, nitrogen and carbon on the microstructure and compression properties of titanium foams

Lefebvre, Louis-Philippe
Baril, Eric
De Camaret, Laurent

May 2013

This paper presents the effect of oxygen, nitrogen, and carbon concentration on the microstructure a...

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit

Yan, M.
Qian, M.
Kong, C.
Dargusch, M. S.

February 2014

The formation of grain boundary (GB) brittle carbides with a complex three-dimensional (3-D) morphol...

The effect of oxygen on the mechanical properties of a B.C.C. titanium alloy.

Rosenberg, William David

January 1972

Massachusetts Institute of Technology. Dept. of Metallurgy and Materials Science. Thesis. 1972. Sc.D...

Effect of heat treatment on microstructure and mechanical properties of Ti-5wt-%Ni alloys for use as biomaterial

Cascadan, Daniela
Buzalaf, M. A. R.
Grandini, Carlos Roberto

January 2014

Titanium alloys are among the most important and frequently used class of biomaterials. In addition ...

The effect of carbon and oxygen on microstructure and mechanical properties of Ti-25V-15Cr-2Al(wt%) alloys

Abstract

Extracted data

The effect of carbon and oxygen on microstructure and mechanical properties of Ti-25V-15Cr-2Al(wt%) alloys

Abstract

Extracted data

Related items

Related items