Bench‐scale laboratory studies were conducted to examine the bacterial populations in the activated sludge process under different operating conditions and to determine the effects of bioaugmentation with liquid mixed culture bacteria on the bacterial populations and the process efficiency. Results indicate that bacterial populations were not related to the mixed liquor volatile suspended solids (MLVSS) concentrations. The organic removal rates were related to the logarithm of the bacterial concentrations in the mixed liquor. A very reliable kinetic model for organic removal was developed based on heterotrophic bacterial concentrations. Bioaugmentation improved organic removal rate coefficients, but resulted in higher organic residual in th...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
Substrate removal is most commonly modelled with a Monod or a linear rate equation. In these express...
Bench‐scale laboratory studies were conducted to examine the bacterial populations in the activated ...
A laboratory study was conducted to determine the effect of bioaugmentation on nitrification perform...
The purpose of this study was to determine the effect of an aerobic bioaugmentation process on the a...
In this work, successful treatment of refinery spent-sulfidic caustic was achieved in activated slud...
In the present study, the effect of bioaugmentation strategy on the sequencing batch reactor (SBR) p...
Activated sludge is commonly used to treat bleached kraft pulp mill effluent (BKME). Treatment perf...
Includes bibliographical references.To aid the design and operation of the single sludge activated s...
Adequate information is available on colour and organics removal in batch mode using pure microbial ...
Bioaugmentation with a mixture of microorganisms (Bacteria and Archaea) was applied to improve the a...
The activated sludge process is the preferred technology for biological wastewater treatment. Despit...
In this study, the effect of bioaugmentation on the sequencing batch reactor (SBR) performance while...
Bioaugmentation with a mixture of microorganisms (Bacteria and Archaea) was applied to improve the a...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
Substrate removal is most commonly modelled with a Monod or a linear rate equation. In these express...
Bench‐scale laboratory studies were conducted to examine the bacterial populations in the activated ...
A laboratory study was conducted to determine the effect of bioaugmentation on nitrification perform...
The purpose of this study was to determine the effect of an aerobic bioaugmentation process on the a...
In this work, successful treatment of refinery spent-sulfidic caustic was achieved in activated slud...
In the present study, the effect of bioaugmentation strategy on the sequencing batch reactor (SBR) p...
Activated sludge is commonly used to treat bleached kraft pulp mill effluent (BKME). Treatment perf...
Includes bibliographical references.To aid the design and operation of the single sludge activated s...
Adequate information is available on colour and organics removal in batch mode using pure microbial ...
Bioaugmentation with a mixture of microorganisms (Bacteria and Archaea) was applied to improve the a...
The activated sludge process is the preferred technology for biological wastewater treatment. Despit...
In this study, the effect of bioaugmentation on the sequencing batch reactor (SBR) performance while...
Bioaugmentation with a mixture of microorganisms (Bacteria and Archaea) was applied to improve the a...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
A laboratory study was conducted to determine the effect of bacterial augmentation with LLMO (liquid...
Substrate removal is most commonly modelled with a Monod or a linear rate equation. In these express...