Inverse modelling and inverse simulation for system engineering and control applications

Following extensive development over the past two decades, techniques of inverse simulation have led to a range of successful applications, mainly in the fields of helicopter flight mechanics, aircraft handling qualities and associated issues in terms of model validation. However, the available methods still have some well-known limitations. The traditional methods based on the Newton-Raphson algorithm suffer from numerical problems such as high-frequency oscillations and can have limitations in their applicability due to problems of input-output redundancy. The existing approaches may also show a phenomenon which has been termed “constraint oscillations” which leads to low-frequency oscillatory behaviour in the inverse solutions. Moreover, the need for derivative information may limit their applicability for situations involving manoeuvre discontinuities, model discontinuities or input constraints. Two new methods are developed to overcome these issues. The first one, based on sensitivity-analysis theory, allows the Jacobian matrix to be calculated by solving a sensitivity equation and also overcomes problems of input-output redundancy. In addition, it can improve the accuracy of results compared with conventional methods and can deal with the problem of high-frequency oscillations to some extent. The second one, based on a constrained Nelder-Mead search-based optimisation algorithm, is completely derivative-free algorithm for inverse simulation. This approach eliminates problems which make traditional inverse simulation techniques difficult to apply in control applications involving discontinuous issues such as actuator amplitude or rate limits. This thesis also offers new insight into the relationship between mathematically based techniques of model inversion and the inverse simulation approach. The similarities and shortcomings of both these methodologies are explored. The findings point to the possibility that inverse simulation can be used successfully within the control system design process for feedforward controllers for model-based output-tracking control system structures. This avoids the more complicated and relatively tedious techniques of model inversion which have been used in the past for feedforward controller design. The methods of inverse simulation presented in this thesis have been applied to a number of problems which are concerned mainly with helicopter and ship control problems and include cases involving systems having nonminimum-phase characteristics. The analysis of results for these practical applications shows that the approaches developed and presented in this thesis are of practical importance. It is believed that these developments form a useful step in moving inverse simulation methods from the status of an academic research topic to a practical and robust set of tools for engineering system design.EThOS - Electronic Theses Online ServiceGBUnited Kingdo