International audienceBy DTA, X-ray diffraction, EMF methods and microhardness measurements, the phase equilibria on the concentration sections Tl5Te3-Tl4PbTe3-Tl9BiTe6 (I), Tl2Te-Tl4PbTe3-Tl9BiTe6 (II), Tl5Te3-Tl9NdTe6-Tl9BiTe6 (III) and Tl2Te-Tl9NdTe6-Tl9BiTe6 (IV) of the multinary systems Tl-Pb(Nd)-Bi-Te were investigated. A number of isopleth sections, projections of liquidus and solidus surfaces of the systems (I)–(IV) were constructed. The concentration dependences of crystal lattice parameters, microhardness and of partial thermodynamic functions of thallium () in alloys were determined. The investigated systems are characterized by formation of continuous (I, III) or wide (II, IV) areas of solid solutions based on Tl5Te3 compound
Polymetallic ore deposits of low temperature origin often contain thallium as a minor element. By me...
International audienceDSC was used to study the phase equilibrium in the TbBr3-LiBr binary system. T...
The 8Nb isopleth section of a Ti-Al-Nb system is experimentally determined based on thermal analysis...
<div><p>The aim of the present study was to determine the phase relations in the Tl4PbTe3-Tl9TbTe6-T...
In this study the phase equilibria in the Tl2Te–Tl2Te3–TlTmTe2compositions area of the Tl...
The Nd-Tl system has been studied by differential thermal analysis, chemical analysis, metallography...
The Pr-Tl system was studied in the composition range 15-100 at.% Tl using differential thermal anal...
The data in the literature relevant to the intermediate phases and to the state diagrams of the R-Tl...
A reasonable experimental literature has now been built up on Ti-Al-X ternary phase diagrams. Howeve...
International audienceA deep knowledge of phase relationships involving a liquid phase is of critica...
The paper presents the calculation results on the construction of solidus lines of phase diagrams fo...
The TDB file is use to extrapolate isothermal section of Bi-Te-Yb system.Combine the EPMA and XRD r...
Legierungen auf TiAl-Basis sind ein vielversprechender Ersatz für Superlegierungen auf Ni-Basis für ...
Precise knowledge of the phase equilibria in the Ti-Al-Nb system between 700 and 900 °C is of crucia...
There are presently limited information regarding the liquid–solid equilibria at the (Al)-rich regio...
Polymetallic ore deposits of low temperature origin often contain thallium as a minor element. By me...
International audienceDSC was used to study the phase equilibrium in the TbBr3-LiBr binary system. T...
The 8Nb isopleth section of a Ti-Al-Nb system is experimentally determined based on thermal analysis...
<div><p>The aim of the present study was to determine the phase relations in the Tl4PbTe3-Tl9TbTe6-T...
In this study the phase equilibria in the Tl2Te–Tl2Te3–TlTmTe2compositions area of the Tl...
The Nd-Tl system has been studied by differential thermal analysis, chemical analysis, metallography...
The Pr-Tl system was studied in the composition range 15-100 at.% Tl using differential thermal anal...
The data in the literature relevant to the intermediate phases and to the state diagrams of the R-Tl...
A reasonable experimental literature has now been built up on Ti-Al-X ternary phase diagrams. Howeve...
International audienceA deep knowledge of phase relationships involving a liquid phase is of critica...
The paper presents the calculation results on the construction of solidus lines of phase diagrams fo...
The TDB file is use to extrapolate isothermal section of Bi-Te-Yb system.Combine the EPMA and XRD r...
Legierungen auf TiAl-Basis sind ein vielversprechender Ersatz für Superlegierungen auf Ni-Basis für ...
Precise knowledge of the phase equilibria in the Ti-Al-Nb system between 700 and 900 °C is of crucia...
There are presently limited information regarding the liquid–solid equilibria at the (Al)-rich regio...
Polymetallic ore deposits of low temperature origin often contain thallium as a minor element. By me...
International audienceDSC was used to study the phase equilibrium in the TbBr3-LiBr binary system. T...
The 8Nb isopleth section of a Ti-Al-Nb system is experimentally determined based on thermal analysis...