Analysis of Permanent Magnet Synchronous Motor by Different Control Methods with Ansys Maxwell and Simplorer Co-simulation

In this study, permanent magnet synchronous motor control methods were investigated. In the literature, permanent magnet synchronous motor control methods are applied with different methods. In order to make the analysis of permanent magnet synchronous motor designed with Ansys Maxwell program to be realistic, control algorithms must be applicable to motor during magnetic analysis. In this context, different control algorithms were written to the previously designed synchronous motor and the real performance of the motor during the analyzes was tried to be reached. As known, FOC (field oriented control control) and DTC (direct torque control) methods are used as the control method of permanent magnet synchronous motors. These methods are linked by magnetic analysis by creating Ansys Simplorer program. Thus, the magnetic analysis of the motor under control with a control method was carried out in Ansys Maxwell program. In this way, the actual behavior of the motor has been an idea. In the study, without control algorithm, analyses were made using FOC and DTC methods and motor behavior was compared. © 2020, Springer Nature Switzerland AG