Monitoring and Protection of Power Distribution Networks with IEC 61850-9-2 Standard

In the modern power grid, communication plays a vital role in making the system more reliable and secure. The communications network transfers data between different units to a control center or to Intelligent Electric Devices (IEDs) in order to accurately control or protect the modern power system. The paper discussed possible ways to monitor the measured values for protecting the power system according to IEC 61850-9-2 (sample value). The sequence of the process consists of streaming the sample value packet, decoding it, and phasor extraction and filtering, which are discussed here. To validate the research, Sundom Smart Grid was used as a pilot to measure the values converted to digital form (IEC 61850-9-2) and to stream it to the system through a highly secure communications network. To decode the SV packet, two scenarios are presented in the case study, based on processing useful features of the IEC 61850-9-2 standard-based raw data streamed from the SSG, including μPMU in a range of embedded instruments and a real-time simulator. The main result of this paper is an algorithm for analyzing SV packets and determining whether the network is operating normally.©2020 IET. This paper is a postprint of a paper submitted to and accepted for publication in 15th International Conference on Developments in Power System Protection (DPSP 2020) and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at the IET Digital Library.fi=vertaisarvioitu|en=peerReviewed