For PWR power plants, the steam generator (SG) provides a dynamic link between the reactor and the turbine generator. A steam generator typically consists of Inconel tubes anchored at intervals with stainless steel support plates. The primary coolant from the nuclear reactor circulates through these tubes. Heat, transferred to the secondary coolant by conduction through the tube wall, generating steam which is used for running the turbine
Remote field eddy current (RFEC) technique uses separate exciter and receiver coils and low-excitati...
A numerical finite element model, capable of simulating eddy current testing (ECT) of steam generato...
This thesis presents a novel procedure for representing and processing multifrequency eddy current s...
Eddy current testing is a widely used nondestructive testing (NDT) method, particularly for inspecti...
Eddy current testing is commonly used for steam generator tubes inspection. The capabilities of dete...
Eddy-current methods provide the best in-service inspection of steam generator tubing, but present t...
Abstract: We develop a model for characterizing amplitude and phase probability distributions of edd...
Most of the nuclear power plants(NPPs) now in service in Japan are based on either of two reactor te...
Eddy current testing is a widely used nondestructive testing method, especially for inspecting steam...
The basic method for inspecting the soundness of steam generator tubes is multifrequency eddy curren...
Emphasis on the reliability and safety of nuclear power plants has contributed to a growing interest...
As the nuclear yard ages, the control of steam generator tubes (SGT) must deal with new problems. In...
Commercial nuclear power plants in Japan run with higher safety standards because of the high reliab...
Nuclear power plants supply about 80% of the total production of electricity in France. Non-Destruct...
A multifaceted development program is in progress in the United States to study techniques for in-se...
Remote field eddy current (RFEC) technique uses separate exciter and receiver coils and low-excitati...
A numerical finite element model, capable of simulating eddy current testing (ECT) of steam generato...
This thesis presents a novel procedure for representing and processing multifrequency eddy current s...
Eddy current testing is a widely used nondestructive testing (NDT) method, particularly for inspecti...
Eddy current testing is commonly used for steam generator tubes inspection. The capabilities of dete...
Eddy-current methods provide the best in-service inspection of steam generator tubing, but present t...
Abstract: We develop a model for characterizing amplitude and phase probability distributions of edd...
Most of the nuclear power plants(NPPs) now in service in Japan are based on either of two reactor te...
Eddy current testing is a widely used nondestructive testing method, especially for inspecting steam...
The basic method for inspecting the soundness of steam generator tubes is multifrequency eddy curren...
Emphasis on the reliability and safety of nuclear power plants has contributed to a growing interest...
As the nuclear yard ages, the control of steam generator tubes (SGT) must deal with new problems. In...
Commercial nuclear power plants in Japan run with higher safety standards because of the high reliab...
Nuclear power plants supply about 80% of the total production of electricity in France. Non-Destruct...
A multifaceted development program is in progress in the United States to study techniques for in-se...
Remote field eddy current (RFEC) technique uses separate exciter and receiver coils and low-excitati...
A numerical finite element model, capable of simulating eddy current testing (ECT) of steam generato...
This thesis presents a novel procedure for representing and processing multifrequency eddy current s...