The thesis is focused on the oxidation characteristics of two complex con- centrated alloys - FeAlCrMo and FeAlCrV. Potentiodynamic polarisation tests were performed in order to characterize corrosion behavior of the alloys in two different corrosion media (aqueous solution of 3,5% NaCl and 0,5M H2SO4), in addition, high-temperature oxidation resistance was studied. All tests were perfor- med also for stainless steel used as a benchmark. An excellent corrosion resistance of both alloys was discovered, especially in the acidic solution, the studied alloys even surpassed reference stainless steel. On the contrary, poor resistance to high- temperature oxidation was observed. Particularly FeAlCrV exhibited catastrophic properties and resistance...
Stainless steel 316, duplex steel 2205 and carbon steel 1008 were examined for compatibility with th...
The development in the production of heating-element sheathing to be used for domestic boilers is ad...
The corrosive environment in biomass- and waste-fired boilers has been known for several years. The ...
The increasing industry demands give rise to a continuous call for materials with an improved combin...
The pitting corrosion of some stainless steel alloys (preoxidized at different conditions) in 3.5 % ...
The corrosion resistance of AISI 316L, AISI 904L, Sanicro 28, SAF 2205, SAF 2507 and SAF 2707 was st...
International audienceSelected topics in field of the study of the mechanisms of corrosion and of ox...
Five experimental FeCrAl-RE alloys have been exposed up to 10,000 h in stagnant liquid Pb at 550 C. ...
The paper presents results of the research which aim was to compare the corrosion resistance of allo...
The molten salt corrosion performance of SS-HP40 with high Cr content and carbon steel T22 with low ...
Corrosion resistance of pure Fe, Cr, and Ni materials exposed in NaVO3 molten salt at 700°C was eval...
The oxidation resistance properties of a group of Fe-Cr-Al alloys have been studied. The oxidation r...
FeCrAl alloys are high temperature structural materials with ever increasing technological importanc...
This paper presents, using a specific experimental set-up, the cathodic polarization curves recorded...
In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER ste...
Stainless steel 316, duplex steel 2205 and carbon steel 1008 were examined for compatibility with th...
The development in the production of heating-element sheathing to be used for domestic boilers is ad...
The corrosive environment in biomass- and waste-fired boilers has been known for several years. The ...
The increasing industry demands give rise to a continuous call for materials with an improved combin...
The pitting corrosion of some stainless steel alloys (preoxidized at different conditions) in 3.5 % ...
The corrosion resistance of AISI 316L, AISI 904L, Sanicro 28, SAF 2205, SAF 2507 and SAF 2707 was st...
International audienceSelected topics in field of the study of the mechanisms of corrosion and of ox...
Five experimental FeCrAl-RE alloys have been exposed up to 10,000 h in stagnant liquid Pb at 550 C. ...
The paper presents results of the research which aim was to compare the corrosion resistance of allo...
The molten salt corrosion performance of SS-HP40 with high Cr content and carbon steel T22 with low ...
Corrosion resistance of pure Fe, Cr, and Ni materials exposed in NaVO3 molten salt at 700°C was eval...
The oxidation resistance properties of a group of Fe-Cr-Al alloys have been studied. The oxidation r...
FeCrAl alloys are high temperature structural materials with ever increasing technological importanc...
This paper presents, using a specific experimental set-up, the cathodic polarization curves recorded...
In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER ste...
Stainless steel 316, duplex steel 2205 and carbon steel 1008 were examined for compatibility with th...
The development in the production of heating-element sheathing to be used for domestic boilers is ad...
The corrosive environment in biomass- and waste-fired boilers has been known for several years. The ...