Phase and baseline calibration for microwave interferometric radiometers sing beacons

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The relative phase and amplitude calibration between individual receiving elements are one of the key challenges in interferometric microwave radiometry. For monolithic interferometers, for example the Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) on board the Soil Moisture and Ocean Salinity (SMOS) mission, the calibration of these two parameters is accomplished by correlated noise injection, where a noise signal from a central noise source is distributed to multiple elements in phase, and any measured phase and amplitude differences can be measured and compensated. As new multisatellite interferometers are being proposed, a new strategy capable of calibrating these errors between the free-flying antennas as well as any antenna position errors is required. In this article, a new calibration scheme is proposed which uses a set of microwave beacons in place of the central noise source, placed at known locations within the interferometer’s field of view. The visibility function produced by these point-sources can be precalculated, and any errors between the calculated and the measured visibility samples can be attributed to the errors to be determined.Postprint (published version