Transparent and conductive CdS:Ca thin films for optoelectronic applications

POLAT, ISMAIL/0000-0002-5134-0246WOS: 000545722100002This paper presents the structural, morphological, optical and electrical evolution of Ca-doped CdS thin films. Non-doped and Ca-doped CdS samples with various amounts of Ca atoms (from 0 to 10 at.% with an increasing step of 2 at.%) were grown by spray pyrolysis route on glass slides. the structural investigation by X-ray diffraction showed that Ca-doping distorted CdS structure until 8 at.% Ca-doping and then a slight improvement in the intensity of (101) peak was obtained for 10 at.% Ca-doping compared to the other Ca-doping samples. Morphological analysis displayed a grain growth for a low amount of Ca-doping whereas higher concentration of Ca-doping led to a reduction in the grain size of CdS thin films. More stoichiometric CdS specimens were obtained after various amounts of Ca-doping according to energy dispersive X-ray spectroscopy data. Transparency of the CdS samples enhanced remarkably with the incorporation of Ca atoms in CdS with a particular concentration of 10 at.%. Tauc's plot investigation illustrated that the bandgap score of samples changed from 2.54 eV for non-doped CdS to 2.48 eV for 4 at.% Ca-doped CdS thin films. Further increase of Ca-doping doesn't vary the bandwidth of CdS samples. Photoluminescence data indicated that Ca-doped CdS thin films had lower intrinsic defects compared with non-doped CdS one. the electrical examination demonstrated that the carrier density of CdS thin films increased till 6 at.% Ca-doping and then decreased further increase of Ca-doping. However, resistivity values exhibited the opposite behavior accordingly. in conclusion, it can be pronounced that 6 at.% Ca-doped CdS thin films are the optimum specimen to be used as an effective transparent and conductive material in the optoelectronic devices.Adana Alparslan Turkes Science and Technology University [19103001]All the authors wish to thank Adana Alparslan Turkes Science and Technology University for its financial support under a project number of 19103001