A series of earthquakes, the highest of magnitude Mw 5.9, hit a portion of the Po Valley in Northern Italy, which was only recently classified as seismic. The paper reports the findings and the lessons learnt from a preliminary field survey which was conducted immediately after the second event. As a result of the economic attitude of the affected area, and possibly of the characteristics of the event, an unprecedented number of industrial precast buildings were affected, resulting into most of the casualties as well as in large economic losses. Whereas most of the damaged and collapsed buildings were designed for gravity loads only, evidence of poor behavior of some precast buildings designed according to seismic provisions were discovered...
In May 2012, Emilia-Romagna (Northern Italy) was hit by a sequence of earthquakes. The two main shoc...
open3noThe present paper presents a complete and commented collection of cases of damage and collaps...
The present paper describes the collapses in precast industrial buildings caused by the 2012 Emilia ...
A series of earthquakes, the highest of magnitude Mw 5.9, hit a portion of the Po Valley in Northern...
A series of earthquakes, the highest of magnitude M w 5.9, hit a portion of the Po Valley in North...
On 20 and 29 May 2012, two earthquakes of MW5.9 and MW5.8 occurred in the Emilia region of northern ...
A series of earthquakes struck the Emilia region, in Northern Italy, in May 2012. Two main mainshock...
On May 2012 two earthquakes occurred in Emilia-Romagna region (Italy) causing several damages to exi...
Two 5.9 Mw and 5.8 Mw earthquakes hit Emilia-Romagna region on May 2012. Most of the precast RC one-...
A field mission was conducted in the region affected by the May-June 2012 earthquakes in the Pianura...
On 20th and 29th May 2012 two earthquakes of magnitude 5.9 and 5.8 (MW) occurred in the Emilia regio...
none5noThe 2012 Emilia (Italy) earthquakes struck a highly industrialized area including several tho...
During Emilia-Romagna earthquakes (Northern Italy) on May 2012 a huge number of existing precast RC ...
The thesis is focused on the seismic behavior of existing RC precast buildings. This structural typo...
In May 2012, Emilia-Romagna (Northern Italy) was hit by a sequence of earthquakes. The two main shoc...
open3noThe present paper presents a complete and commented collection of cases of damage and collaps...
The present paper describes the collapses in precast industrial buildings caused by the 2012 Emilia ...
A series of earthquakes, the highest of magnitude Mw 5.9, hit a portion of the Po Valley in Northern...
A series of earthquakes, the highest of magnitude M w 5.9, hit a portion of the Po Valley in North...
On 20 and 29 May 2012, two earthquakes of MW5.9 and MW5.8 occurred in the Emilia region of northern ...
A series of earthquakes struck the Emilia region, in Northern Italy, in May 2012. Two main mainshock...
On May 2012 two earthquakes occurred in Emilia-Romagna region (Italy) causing several damages to exi...
Two 5.9 Mw and 5.8 Mw earthquakes hit Emilia-Romagna region on May 2012. Most of the precast RC one-...
A field mission was conducted in the region affected by the May-June 2012 earthquakes in the Pianura...
On 20th and 29th May 2012 two earthquakes of magnitude 5.9 and 5.8 (MW) occurred in the Emilia regio...
none5noThe 2012 Emilia (Italy) earthquakes struck a highly industrialized area including several tho...
During Emilia-Romagna earthquakes (Northern Italy) on May 2012 a huge number of existing precast RC ...
The thesis is focused on the seismic behavior of existing RC precast buildings. This structural typo...
In May 2012, Emilia-Romagna (Northern Italy) was hit by a sequence of earthquakes. The two main shoc...
open3noThe present paper presents a complete and commented collection of cases of damage and collaps...
The present paper describes the collapses in precast industrial buildings caused by the 2012 Emilia ...