A Calculation Method Based on Isotope Rations for the Determination of Dead Time and its Uncertainty in ICP-MS and the Application to Investigate Some Features of a Continuous Dynode Multiplier.

Method for effective dead time measurement in counting systems

Vinagre, F. L. R.
Conde, C. A. N.

January 2001

The counting losses introduced by the dead time of a counting system are a limiting factor in counti...

Indirect method to estimate the deadtime of a data acquisition system as a function of the data size

Gao, J.
Sasano, M.
Laszlo STUHL
Otsu, H.
Baba, H.

July 2022

Fundamental uncertainty equations for nuclear dating applied to the 140Ba-140La and 227Th-223Ra chronometers

POMME Stefaan
COLLINS S.
HARMS A. V.
JEROME S. M.

February 2016

Basic equations for age dating through activity ratio measurements are presented and applied to nucl...

On the Determination of the True Dead-Time of a Pulse Counting System in Isotope Ratio Mass Spectrometry.

RAMEBAECK Henrik
BERGLUND Michael
VENDELBO Danny
WELLUM Roger
TAYLOR P.d.p.

September 2001

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

The Importance of a Correct Dead Time Setting in Isotope Ratio Mass Spectrometry: Implementation of an Electronically Determined Dead Time to reduce Measurement Uncertainty

NYGREN U.
RAMEBAECK H.
BERGLUND MICHAEL
BAXTER Douglas

November 2006

Dead time determintions on a mass spectromety system with ion counting detection can either be done ...

The importance of a correct dead time setting in isotope ratio mass spectrometry : implementation of an electronically determined dead time to reduce measurement uncertainty

Nygren, Ulrika
Ramebäck, Henrik
Berglund, Michael
Baxter, Douglas

January 2006

Dead time determinations on a mass spectrometry system with ion counting detection can either be don...

The importance of a correct dead time setting in isotope ratio mass spectrometry: Implementation of an electronically determined dead time to reduce measurement uncertainty

Nygren, Ulrika
Ramebäck, Henrik
Berglund, Michael
Baxter, Douglas C.

January 2006

Dead time determinations on a mass spectrometry system with ion counting detection can either be don...

Dependence of detector dead time on analyte mass number in inductively coupled plasma mass spectrometry

Vanhaecke, Frank
De Wannemacker, Günther
Moens, Luc
Dams, Richard
Latkoczy, Christopher
Prohaska, Thomas
Stingeder, Gerhard

January 1998

ICP mass spectrometry is being increasingly used for isotopic analysis and for element determination...

Evaluation of Detector Dead Time Calculation Models for ICP-MS.

NELMS Simon
QUETEL Christophe
PROHASKA T.
VOGL Jochen
TAYLOR P.d.p.

September 2000

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Linearity Testing and Dead-Time Determination for Ion Counters of the Neptune MC-ICP-MS using the IRMM-072/-073/-074 Series of Uranium Isotope Reference Materials

RICHTER Stephan

May 2016

The Environmental Sample Laboratory of the International Atomic Energy Agency (IAEA) routinely analy...

Linearity testing and dead-time determination for MC-ICP-MS ion counters using the IRMM-072 series of uranium isotope reference materials

RICHTER Stephan
KONEGGER-KAPPEL S.
BOULYGA S.
STADELMANN G.
KOEPF A.
SIEGMUND H.

June 2016

The Environmental Sample Laboratory (ESL) of the International Atomic Energy Agency (IAEA) routinely...

An Evaluation of the Applicability of High Resolution ICP-Mass Spectrometry for Isotope Ratio Measurements.

MOENS Luc
DAMS Richard
PAPADAKIS Ioannis
TAYLOR P.d.p.

October 1996

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Method for isotope ratio drift correction by internal amplifier signal synchronization in MC-ICPMS transient signals

Gourgiotis, A.
Bérail, Sylvain
Louvat, P.
Isnard, H.
Moureau, J.
Nonell, A.
Manhes, G.
Birck, J.-L.
Gaillardet, J.
Pécheyran, C.
Chartier, F.
Donard, O.F.X.

January 2014

cited By 15International audienceThe measurement of isotope ratios by Multi Collection Inductively C...

Comparative Performance Study of ICP Mass Spectrometers by Means of U "Isotopic Measurements".

QUETEL Christophe
VOGL Jochen
PROHASKA T.
NELMS Simon
TAYLOR P.d.p.
DE BIEVRE P.

February 2000

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Dead-Time Correction for Nonparalyzing Detectors When Measuring Short-Lived Nuclides

Radovic, Andrija S.
Usman, Shoaib

January 2007

The purpose of this article is to show that when the half-life of a specimen being measured is compa...

Method for effective dead time measurement in counting systems

Vinagre, F. L. R.
Conde, C. A. N.

January 2001

The counting losses introduced by the dead time of a counting system are a limiting factor in counti...

Indirect method to estimate the deadtime of a data acquisition system as a function of the data size

Gao, J.
Sasano, M.
Laszlo STUHL
Otsu, H.
Baba, H.

July 2022

Fundamental uncertainty equations for nuclear dating applied to the 140Ba-140La and 227Th-223Ra chronometers

POMME Stefaan
COLLINS S.
HARMS A. V.
JEROME S. M.

February 2016

Basic equations for age dating through activity ratio measurements are presented and applied to nucl...

On the Determination of the True Dead-Time of a Pulse Counting System in Isotope Ratio Mass Spectrometry.

RAMEBAECK Henrik
BERGLUND Michael
VENDELBO Danny
WELLUM Roger
TAYLOR P.d.p.

September 2001

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

The Importance of a Correct Dead Time Setting in Isotope Ratio Mass Spectrometry: Implementation of an Electronically Determined Dead Time to reduce Measurement Uncertainty

NYGREN U.
RAMEBAECK H.
BERGLUND MICHAEL
BAXTER Douglas

November 2006

Dead time determintions on a mass spectromety system with ion counting detection can either be done ...

The importance of a correct dead time setting in isotope ratio mass spectrometry : implementation of an electronically determined dead time to reduce measurement uncertainty

Nygren, Ulrika
Ramebäck, Henrik
Berglund, Michael
Baxter, Douglas

January 2006

Dead time determinations on a mass spectrometry system with ion counting detection can either be don...

The importance of a correct dead time setting in isotope ratio mass spectrometry: Implementation of an electronically determined dead time to reduce measurement uncertainty

Nygren, Ulrika
Ramebäck, Henrik
Berglund, Michael
Baxter, Douglas C.

January 2006

Dead time determinations on a mass spectrometry system with ion counting detection can either be don...

Dependence of detector dead time on analyte mass number in inductively coupled plasma mass spectrometry

Vanhaecke, Frank
De Wannemacker, Günther
Moens, Luc
Dams, Richard
Latkoczy, Christopher
Prohaska, Thomas
Stingeder, Gerhard

January 1998

ICP mass spectrometry is being increasingly used for isotopic analysis and for element determination...

Evaluation of Detector Dead Time Calculation Models for ICP-MS.

NELMS Simon
QUETEL Christophe
PROHASKA T.
VOGL Jochen
TAYLOR P.d.p.

September 2000

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Linearity Testing and Dead-Time Determination for Ion Counters of the Neptune MC-ICP-MS using the IRMM-072/-073/-074 Series of Uranium Isotope Reference Materials

RICHTER Stephan

May 2016

The Environmental Sample Laboratory of the International Atomic Energy Agency (IAEA) routinely analy...

Linearity testing and dead-time determination for MC-ICP-MS ion counters using the IRMM-072 series of uranium isotope reference materials

RICHTER Stephan
KONEGGER-KAPPEL S.
BOULYGA S.
STADELMANN G.
KOEPF A.
SIEGMUND H.

June 2016

The Environmental Sample Laboratory (ESL) of the International Atomic Energy Agency (IAEA) routinely...

An Evaluation of the Applicability of High Resolution ICP-Mass Spectrometry for Isotope Ratio Measurements.

MOENS Luc
DAMS Richard
PAPADAKIS Ioannis
TAYLOR P.d.p.

October 1996

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Method for isotope ratio drift correction by internal amplifier signal synchronization in MC-ICPMS transient signals

Gourgiotis, A.
Bérail, Sylvain
Louvat, P.
Isnard, H.
Moureau, J.
Nonell, A.
Manhes, G.
Birck, J.-L.
Gaillardet, J.
Pécheyran, C.
Chartier, F.
Donard, O.F.X.

January 2014

cited By 15International audienceThe measurement of isotope ratios by Multi Collection Inductively C...

Comparative Performance Study of ICP Mass Spectrometers by Means of U "Isotopic Measurements".

QUETEL Christophe
VOGL Jochen
PROHASKA T.
NELMS Simon
TAYLOR P.d.p.
DE BIEVRE P.

February 2000

Abstract not availableJRC.D-Institute for Reference Materials and Measurements (Geel

Dead-Time Correction for Nonparalyzing Detectors When Measuring Short-Lived Nuclides

Radovic, Andrija S.
Usman, Shoaib

January 2007

The purpose of this article is to show that when the half-life of a specimen being measured is compa...

Method for effective dead time measurement in counting systems

Vinagre, F. L. R.
Conde, C. A. N.

January 2001

The counting losses introduced by the dead time of a counting system are a limiting factor in counti...

Indirect method to estimate the deadtime of a data acquisition system as a function of the data size

Gao, J.
Sasano, M.
Laszlo STUHL
Otsu, H.
Baba, H.

July 2022

Fundamental uncertainty equations for nuclear dating applied to the 140Ba-140La and 227Th-223Ra chronometers

POMME Stefaan
COLLINS S.
HARMS A. V.
JEROME S. M.

February 2016

Basic equations for age dating through activity ratio measurements are presented and applied to nucl...

A Calculation Method Based on Isotope Rations for the Determination of Dead Time and its Uncertainty in ICP-MS and the Application to Investigate Some Features of a Continuous Dynode Multiplier.

Abstract

Extracted data

A Calculation Method Based on Isotope Rations for the Determination of Dead Time and its Uncertainty in ICP-MS and the Application to Investigate Some Features of a Continuous Dynode Multiplier.

Abstract

Extracted data

Related items

Related items