The Influence of Crystallographic Orientation on Crack Tip Displacements of Microstructurally Small, Kinked Crack Crossing the Grain Boundary

The paper presents an analysis of the effects of grain orientations on a short, kinked surface crack in a 316L stainless steel. The kinking of the crack is assumed to take place at the boundary between two neighbouring grains. The analysis is based on a plane-strain finite element crystal plasticity model. The model consists of 212 randomly shaped, sized and oriented grains, loaded monotonically in uniaxial tension to a maximum load of 0.96Rp0.2 (240 MPa). The influence that a random grain structure imposes on a Stage I crack is assessed by calculating the crack tip opening (CTOD) displacements for bicrystal as well as for polycrystal models, considering different crystallographic orientations. Since a Stage I crack is assumed, the crack is always placed in a slip plane. Results from a bicrystal case show that the maximal CTODs are directly related to the stiffness of the grain containing the crack extension. Anisotropic elasticity and crystal plasticity both contribute to this grain stiffness, resulting in maximal CTOD when Schmid factors are the highest on two slip planes. Such crystallographic orientation results in a soft elasto-plastic response. Anisotropic elasticity can additionally increase the softness of a grain at certain crystallographic orientations. Minimal anisotropic elasticity at the crystallographic orientations with the highest Schmid factors causes the CTOD to be maximized. Presuming that the crack will preferably follow the slip plane where the crack tip opening displacement is highest, we show that the crystallographic orientation can affect the CTOD values by a factor of up to 7.7. For a given grain orientation the maximum CTOD is attained when the crack extension deflection into a second grain is between 75.141 and 34. For the polycrystal case we show that grains beyond the first two crack-containing grains change the CTOD by a factor of up to 3.3 and that the largest CTODs are obtained when placing the crack into a slip plane with crack extension that results in a crack extension being more perpendicular to the external load.JRC.F.4-Nuclear design safet