Twelve platinum resistance thermometers (PRTs) were repeatedly calibrated between the triple point of water and the silver point. During each calibration their resistance was also determined at the Cu\u2013Ag eutectic point. The temperatures indicated by the PRTs were within \ub11\u2009mK, except for one that differed by 4\u2009mK from the average, 779.6360\u2009\ub0C, of the other eleven. Four of these PRTs had a lower W (Ag) value than acceptable by the ITS-90, including the one that differed by 4\u2009mK. Thus, within this set of PRTs all the 'acceptable' ones and three out of four 'unacceptable' ones indicated a unique temperature within 1\u2009mK halfway between the aluminium and the silver points.NRC publication: Ye
Thirty-one commercially designed platinum resistance thermometers were evaluated for applicability t...
KEY COMPARISON: The comparison EUROMET.T-K4 is the regional extension of CCT-K4: an intercomparison ...
Two new miniature metallic sealed-cells containing the triple point of water, WTP (273.16 ...
A new comparison system has been constructed for the calibration of capsule-type standard ...
Platinum resistance thermometers (PRTs) are widely used for accurate temperature measurements in in...
Calibration of commercial platinum resistance thermometer using Z function interpolatio
Industrial grade platinum resistance thermometers were calibrated in the temperature range from 200°...
Four platinum resistance thermometer data sets of resistance ratio as a function of temperature from...
Stabilities of standard platinum resistance thermometers (SPRTs) were tested in the temperature rang...
Au/Pt thermocouples are considered to be an alternative to High Temperature Standard Plati...
European national metrology institutes use calibration systems of various types for calibrating ther...
(ITS-90) substituted the platinum-platinum-10 % rhodium thermocouple by the high temperature standar...
7 p. : il.Three nickel–carbon (Ni–C) and three iron–carbon (Fe–C) eutectic fixed points cells of a n...
Abstract. The most practical method of interpolation for industrial platinum thermometers is the use...
European national metrology institutes use calibration systems of various types for calibrating the...
Thirty-one commercially designed platinum resistance thermometers were evaluated for applicability t...
KEY COMPARISON: The comparison EUROMET.T-K4 is the regional extension of CCT-K4: an intercomparison ...
Two new miniature metallic sealed-cells containing the triple point of water, WTP (273.16 ...
A new comparison system has been constructed for the calibration of capsule-type standard ...
Platinum resistance thermometers (PRTs) are widely used for accurate temperature measurements in in...
Calibration of commercial platinum resistance thermometer using Z function interpolatio
Industrial grade platinum resistance thermometers were calibrated in the temperature range from 200°...
Four platinum resistance thermometer data sets of resistance ratio as a function of temperature from...
Stabilities of standard platinum resistance thermometers (SPRTs) were tested in the temperature rang...
Au/Pt thermocouples are considered to be an alternative to High Temperature Standard Plati...
European national metrology institutes use calibration systems of various types for calibrating ther...
(ITS-90) substituted the platinum-platinum-10 % rhodium thermocouple by the high temperature standar...
7 p. : il.Three nickel–carbon (Ni–C) and three iron–carbon (Fe–C) eutectic fixed points cells of a n...
Abstract. The most practical method of interpolation for industrial platinum thermometers is the use...
European national metrology institutes use calibration systems of various types for calibrating the...
Thirty-one commercially designed platinum resistance thermometers were evaluated for applicability t...
KEY COMPARISON: The comparison EUROMET.T-K4 is the regional extension of CCT-K4: an intercomparison ...
Two new miniature metallic sealed-cells containing the triple point of water, WTP (273.16 ...