Add to ORKGA series of indentation tests were performed on first year sea ice. Flat and hemispherical indentor heads were forced into a semi-infinite vertical ice wall. The tests were conducted at high loading rates and brittle ice failure predominates. The results of the tests are presented and penetration and contact factors are discussed in terms of failure modes observed.NRC publication: Ye
The failure of high pressure zones at the interface between ice and an indenting structure is known ...
Observations on rate sensitivity of uniaxial, unconfined compressive strength and deformation of fre...
As part of an INSROP project, Large Scale Hull Loading of First-Year Sea Ice, a series of tests in f...
The test apparatus and detailed methodology to perform indentation tests on sea ice in the field are...
A series of indentation and penetration tests have been performed by edge loading of a vertical inde...
In order to improve the estimation of the ice load during ice-structure interaction, this study aims...
Indentation tests were conducted using a segmented indentor at different indentation velocities agai...
This paper presents a partial analysis of data from an extensive series of laboratory indentation te...
This paper presents a partial analysis of data from an extensive series of laboratory indentation te...
A series of ice indentation tests was carried out in a small ice basin between October 1989 and Febr...
Segmented indentors were used to conduct identation tests using urea model ice. Each segment of an i...
A series of ice indentation tests was carried out in a small ice basin between October 1989 and Febr...
For Phase 2 of INSROP Project I.1.7, Large Scale Hull Loading of First-Year Sea Ice, a series of tes...
A series of small-scale ice indentation tests has been carried out to study the compressive failure ...
Deformed ice such as an ice ridge or an ice rubble field may impose a large load on hydraulic struct...
The failure of high pressure zones at the interface between ice and an indenting structure is known ...
Observations on rate sensitivity of uniaxial, unconfined compressive strength and deformation of fre...
As part of an INSROP project, Large Scale Hull Loading of First-Year Sea Ice, a series of tests in f...
The test apparatus and detailed methodology to perform indentation tests on sea ice in the field are...
A series of indentation and penetration tests have been performed by edge loading of a vertical inde...
In order to improve the estimation of the ice load during ice-structure interaction, this study aims...
Indentation tests were conducted using a segmented indentor at different indentation velocities agai...
This paper presents a partial analysis of data from an extensive series of laboratory indentation te...
This paper presents a partial analysis of data from an extensive series of laboratory indentation te...
A series of ice indentation tests was carried out in a small ice basin between October 1989 and Febr...
Segmented indentors were used to conduct identation tests using urea model ice. Each segment of an i...
A series of ice indentation tests was carried out in a small ice basin between October 1989 and Febr...
For Phase 2 of INSROP Project I.1.7, Large Scale Hull Loading of First-Year Sea Ice, a series of tes...
A series of small-scale ice indentation tests has been carried out to study the compressive failure ...
Deformed ice such as an ice ridge or an ice rubble field may impose a large load on hydraulic struct...
The failure of high pressure zones at the interface between ice and an indenting structure is known ...
Observations on rate sensitivity of uniaxial, unconfined compressive strength and deformation of fre...
As part of an INSROP project, Large Scale Hull Loading of First-Year Sea Ice, a series of tests in f...