Add to ORKGA series of 1:8 scale model tests were conducted on two (2) typical 65-foot fishing vessels, one round bilge and one hard-chine design, but with the same displacement. Tests included hull resistance, self-propulsion, wake survey and seakeeping in both regular and irregular sea-ways. Detailed results are presented for both.NRC publication: Ye
This report describes the results of series of experiments conducted at the Institute for Marine Dyn...
This report presents the data for a series of model tests performed on a 1:8 scale model of a propos...
The third generation「Nansei-Maru」is a fishery training vessel of the Faculty of Fisheries, Kagoshima...
능, Model test 모형시험, Circulating water channel 회류수조 ABSTRACT: A 25ft class fishing leisure boat is de...
International audienceThis study examines the relative merits of physical testing techniques which m...
The type of fishing vessel that is widely used by fishermen in North Sulawesi, especially in the Bit...
An investigation into the hull and propulsion system matching of a fishing vessel was carried out. T...
Canadian inshore fishing vessels have been constrained by length restrictions. In order to meet incr...
In the ordinary model exlperiments, especially in the case performed in the Towing Tank, the frictio...
This report describes the experiments carried out on a 1:29.69 scale fully appended model of the Pre...
The continuing loss of life at sea due to the capsizing of fishing vessels in inclement weather requ...
The report describes an experimental investigation into the seakeeping properties of catamarans. Thr...
Actual sea waves and vessel motion are an unsteady nonlinear random process. The currently adopted t...
This report describes experiments carried out on a 1:29.78 scale fully appended model of the Contrac...
The ?Atlantic Swell? is a 35? inshore fishing vessel. The vessel was built in St. Jones Within, Newf...
This report describes the results of series of experiments conducted at the Institute for Marine Dyn...
This report presents the data for a series of model tests performed on a 1:8 scale model of a propos...
The third generation「Nansei-Maru」is a fishery training vessel of the Faculty of Fisheries, Kagoshima...
능, Model test 모형시험, Circulating water channel 회류수조 ABSTRACT: A 25ft class fishing leisure boat is de...
International audienceThis study examines the relative merits of physical testing techniques which m...
The type of fishing vessel that is widely used by fishermen in North Sulawesi, especially in the Bit...
An investigation into the hull and propulsion system matching of a fishing vessel was carried out. T...
Canadian inshore fishing vessels have been constrained by length restrictions. In order to meet incr...
In the ordinary model exlperiments, especially in the case performed in the Towing Tank, the frictio...
This report describes the experiments carried out on a 1:29.69 scale fully appended model of the Pre...
The continuing loss of life at sea due to the capsizing of fishing vessels in inclement weather requ...
The report describes an experimental investigation into the seakeeping properties of catamarans. Thr...
Actual sea waves and vessel motion are an unsteady nonlinear random process. The currently adopted t...
This report describes experiments carried out on a 1:29.78 scale fully appended model of the Contrac...
The ?Atlantic Swell? is a 35? inshore fishing vessel. The vessel was built in St. Jones Within, Newf...
This report describes the results of series of experiments conducted at the Institute for Marine Dyn...
This report presents the data for a series of model tests performed on a 1:8 scale model of a propos...
The third generation「Nansei-Maru」is a fishery training vessel of the Faculty of Fisheries, Kagoshima...