Add to ORKGModel tests with a multi-faceted cone in level ice and ridges were carried out at the Institute for Marine Dynamics. This report describes the test program in details and documents the test results.NRC publication: Ye
A software implementation in Matlab of a previously developed mathematical model for calculation of ...
Several model-scale tests with a ship model have been performed in the ice tank of the Marine Techno...
A series of tests in an ice tank was carried out using a model-scale ship to investigate the ice loa...
Model tests with a downward breaking cone in level ice and ridges have been carried out in the ice t...
Model tests with a multi-faceted cone in level ice and ridges were carried out in the 96 m long ice ...
Ice forces were measured on three downward breaking cone models in the IMD ice tank. This reports su...
Conical form used to deflect ice driven by wind and current. As ice fails and displaces, structure a...
Progress in determining icebreaking performance from model scale tests is being achieved through a b...
A series of model tests has been carried out on downward breaking conical structures using low salin...
Ice model tests of a 1/12 scale 60 upward breaking cone are described. The cone was tested in three ...
AbstractTwo series of model tests were performed to observe the dynamic ice loads on conical structu...
This report describes the model tests conducted in the ice tank at the Institute for Marine Dynamics...
Experimental procedures for obtaining the crushing strength and pressure profiles of cone shaped ice...
A series of upward breaking cone tests was conducted at NRC/IMD's ice tank in level ice using EG/AD/...
The stationkeeping performance prediction of a Dynamic Positioning (DP) vessel greatly depends on th...
A software implementation in Matlab of a previously developed mathematical model for calculation of ...
Several model-scale tests with a ship model have been performed in the ice tank of the Marine Techno...
A series of tests in an ice tank was carried out using a model-scale ship to investigate the ice loa...
Model tests with a downward breaking cone in level ice and ridges have been carried out in the ice t...
Model tests with a multi-faceted cone in level ice and ridges were carried out in the 96 m long ice ...
Ice forces were measured on three downward breaking cone models in the IMD ice tank. This reports su...
Conical form used to deflect ice driven by wind and current. As ice fails and displaces, structure a...
Progress in determining icebreaking performance from model scale tests is being achieved through a b...
A series of model tests has been carried out on downward breaking conical structures using low salin...
Ice model tests of a 1/12 scale 60 upward breaking cone are described. The cone was tested in three ...
AbstractTwo series of model tests were performed to observe the dynamic ice loads on conical structu...
This report describes the model tests conducted in the ice tank at the Institute for Marine Dynamics...
Experimental procedures for obtaining the crushing strength and pressure profiles of cone shaped ice...
A series of upward breaking cone tests was conducted at NRC/IMD's ice tank in level ice using EG/AD/...
The stationkeeping performance prediction of a Dynamic Positioning (DP) vessel greatly depends on th...
A software implementation in Matlab of a previously developed mathematical model for calculation of ...
Several model-scale tests with a ship model have been performed in the ice tank of the Marine Techno...
A series of tests in an ice tank was carried out using a model-scale ship to investigate the ice loa...