In a previous report "Comparison of Combustibility Test Procedures" (1), results of tests were given on the combustibility of seven different building materials for the purpose of guiding the Canadian Standards Association Sub-committee on Noncombustibility in the preparation of a new specification for the combustibility rating of materials.Peer reviewed: NoNRC publication: Ye
ABSTRACT: A new intermediate-scale fire test has been developed as a screening tool to evaluate wall...
The origins of standardised fire testing can be traced back to 1870’s, and the origin of the standar...
The acceptable solutions provided in the 2010 National Building Code (NBC) Division B [1] limits the...
The purpose of this investigation was to compare the merits of the combustibility test procedure of ...
Materials of limited combustibility are defined in Table A7: a. (National classes) by reference to...
The combustion process is described and analysed based on the experimental results in the context of...
The purpose of the A.S.T.M. Combustibility Tests, Project A-9, performed by the Fire Research Statio...
This paper will compare small-scale test data with those of full-scale tests. Each small-scale test ...
The IMO flame spread test apparatus was utilized to gain knowledge on the flammability behaviour of ...
The Fire Research Laboratory of the Division of Building Research, National Research Council of Cana...
The sources of the information contained herein are the published reports of fire tests conducted in...
This paper reports on two experiments conducted in a fire resistance furnace to study the difference...
In recent years, fire-rated floor and wall assemblies formed with new materials and construction met...
Wood is commonly used in construction, but often perceived as being less safe than structures made f...
The sources of the information contained herein are the published reports of fire tests conducted in...
ABSTRACT: A new intermediate-scale fire test has been developed as a screening tool to evaluate wall...
The origins of standardised fire testing can be traced back to 1870’s, and the origin of the standar...
The acceptable solutions provided in the 2010 National Building Code (NBC) Division B [1] limits the...
The purpose of this investigation was to compare the merits of the combustibility test procedure of ...
Materials of limited combustibility are defined in Table A7: a. (National classes) by reference to...
The combustion process is described and analysed based on the experimental results in the context of...
The purpose of the A.S.T.M. Combustibility Tests, Project A-9, performed by the Fire Research Statio...
This paper will compare small-scale test data with those of full-scale tests. Each small-scale test ...
The IMO flame spread test apparatus was utilized to gain knowledge on the flammability behaviour of ...
The Fire Research Laboratory of the Division of Building Research, National Research Council of Cana...
The sources of the information contained herein are the published reports of fire tests conducted in...
This paper reports on two experiments conducted in a fire resistance furnace to study the difference...
In recent years, fire-rated floor and wall assemblies formed with new materials and construction met...
Wood is commonly used in construction, but often perceived as being less safe than structures made f...
The sources of the information contained herein are the published reports of fire tests conducted in...
ABSTRACT: A new intermediate-scale fire test has been developed as a screening tool to evaluate wall...
The origins of standardised fire testing can be traced back to 1870’s, and the origin of the standar...
The acceptable solutions provided in the 2010 National Building Code (NBC) Division B [1] limits the...