Add to ORKGAlso presented at: NFPA Conference, Montreal, Quebec, Canada, 1991 and Joint Task Group Meeting on Automatic Sprinklers, Vancouver, B.C., Canada, 1991Peer reviewed: NoNRC publication: Ye
textKnowledge of fire risk is crucial for manufacturers and regulators to make correct choices in pr...
The National Fire Lab of the Institute for Research in Construction (IRC) of the National Research C...
To support the introduction of performance-based building regulations in Canada in the 2003, the Nat...
Fire safety and protection facilities to satisfy current regulatory requirements are a significant c...
Also presented at the Fire Safety of Medium-Rise Timber Frame Residential Buildings Conference on 2-...
Australia has achieved a very good fire safety record. However, concern has been expressed at the po...
Fire loss statistics at the Ontario Fire Marshal's Office in Toronto were retrieved to find relevant...
Also presented at the Computer Application in Fire Science and Fire Engineering in Taipei, Taiwan on...
Fire protection in US nuclear power plants was long regulated under a set of federal regulations cal...
The National Research Council of Canada's risk-cost assessment model, FiRECAM<TM> (Fire Risk Evaluat...
A description is given of a stochastic system model that was developed to represent the dynamic inte...
The Canadian and U.S.A. fire loss statistics for apartment and office buildings were analyzed to obt...
A stochastic risk-cost assessment model is presented for multi-storey apartment buildings. The model...
In this study, FiRECAM? was used to identify cost-effective fire safety design options for a 40-stor...
In fire safety engineering, cost–benefit analysis provides a systematic method to assess whether the...
textKnowledge of fire risk is crucial for manufacturers and regulators to make correct choices in pr...
The National Fire Lab of the Institute for Research in Construction (IRC) of the National Research C...
To support the introduction of performance-based building regulations in Canada in the 2003, the Nat...
Fire safety and protection facilities to satisfy current regulatory requirements are a significant c...
Also presented at the Fire Safety of Medium-Rise Timber Frame Residential Buildings Conference on 2-...
Australia has achieved a very good fire safety record. However, concern has been expressed at the po...
Fire loss statistics at the Ontario Fire Marshal's Office in Toronto were retrieved to find relevant...
Also presented at the Computer Application in Fire Science and Fire Engineering in Taipei, Taiwan on...
Fire protection in US nuclear power plants was long regulated under a set of federal regulations cal...
The National Research Council of Canada's risk-cost assessment model, FiRECAM<TM> (Fire Risk Evaluat...
A description is given of a stochastic system model that was developed to represent the dynamic inte...
The Canadian and U.S.A. fire loss statistics for apartment and office buildings were analyzed to obt...
A stochastic risk-cost assessment model is presented for multi-storey apartment buildings. The model...
In this study, FiRECAM? was used to identify cost-effective fire safety design options for a 40-stor...
In fire safety engineering, cost–benefit analysis provides a systematic method to assess whether the...
textKnowledge of fire risk is crucial for manufacturers and regulators to make correct choices in pr...
The National Fire Lab of the Institute for Research in Construction (IRC) of the National Research C...
To support the introduction of performance-based building regulations in Canada in the 2003, the Nat...