A series of ceramic coatings have been prepared on P91 substrates by spray pyrolysis processes and on Zr\u20132.5Nb substrates by a plasma electrolytic oxidation process. Preliminary results show that coatings obtained with different solution compositions and procedures can reduce the oxidation weight gain of P91 samples by factors of 2\u201310 for exposure times up to 500 h in deaerated supercritical water at 500 \ub0C and 25 MPa. Results also show that the weight gain of a P91 sample with an alumina (Al2O3) coating is about nine times less than that of uncoated P91 after exposures for 400 h in deaerated supercritical water at 650 \ub0C and 25 MPa. These results indicate that the Al2O3 coating shows promising results for preventing oxidati...
Thermal barrier coatings (TBCs) provide protection to minimize aggressive environmental conditions s...
Yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) deposited on CoNiCrAlY oxidation pr...
Oxidation performance of thermal barrier coatings (TBCs) deposited by the axial suspension plasma sp...
For improved efficiency and reduced emissions, the future power plants need to operate at high tempe...
For improved efficiency and reduced emissions, the future power plants need to operate at high tempe...
In this study, aluminized and NiCrAlY plasma-sprayed AISI 310 stainless steel samples were tested in...
The choice of materials is of great concern in the construction of Gen IV supercritical water reacto...
A comparative study of the corrosion properties of thermally sprayed ceramic coatings (Al2O3, Al2O3-...
Plasma coatings, applied by physical vapour deposition, as well as plasma surface treatments could f...
The isothermal oxidation of reactive element (RE)-doped aluminide coatings on IN 713LC alloy substra...
In the nuclear sector, ceramic coatings can be applied to reactor components such as bearings and bo...
Certain refractory ceramics (notably oxides) have desirable properties suitable for the construction...
International audienceCoatings with thicknesses between a few microns and similar to 10 mu m deposit...
The performance of Cr-coated Optimized ZIRLO™ as accident tolerant fuel cladding material for pressu...
Formerly, the role of metallic coatings on Ni-base superalloys was simply to limit environmental att...
Thermal barrier coatings (TBCs) provide protection to minimize aggressive environmental conditions s...
Yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) deposited on CoNiCrAlY oxidation pr...
Oxidation performance of thermal barrier coatings (TBCs) deposited by the axial suspension plasma sp...
For improved efficiency and reduced emissions, the future power plants need to operate at high tempe...
For improved efficiency and reduced emissions, the future power plants need to operate at high tempe...
In this study, aluminized and NiCrAlY plasma-sprayed AISI 310 stainless steel samples were tested in...
The choice of materials is of great concern in the construction of Gen IV supercritical water reacto...
A comparative study of the corrosion properties of thermally sprayed ceramic coatings (Al2O3, Al2O3-...
Plasma coatings, applied by physical vapour deposition, as well as plasma surface treatments could f...
The isothermal oxidation of reactive element (RE)-doped aluminide coatings on IN 713LC alloy substra...
In the nuclear sector, ceramic coatings can be applied to reactor components such as bearings and bo...
Certain refractory ceramics (notably oxides) have desirable properties suitable for the construction...
International audienceCoatings with thicknesses between a few microns and similar to 10 mu m deposit...
The performance of Cr-coated Optimized ZIRLO™ as accident tolerant fuel cladding material for pressu...
Formerly, the role of metallic coatings on Ni-base superalloys was simply to limit environmental att...
Thermal barrier coatings (TBCs) provide protection to minimize aggressive environmental conditions s...
Yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) deposited on CoNiCrAlY oxidation pr...
Oxidation performance of thermal barrier coatings (TBCs) deposited by the axial suspension plasma sp...