Add to ORKGEffect of particle size, concentration of structural defects and the presence of sulfite and sulfate groups on the response of thick-film SnO2 sensors to CH4 and CO were revealed. Particle size and the presence of SO-groups were found to be main parameters determining the sensitivity of SnO2-based sensors to CH4, while structural defects of SnO2 layers are essential for CO detection
Nano-SnO2 powder was prepared by the hydrothermal method in this paper. X-ray powder diffraction (XR...
Metal oxide-based gas sensors are widely used due to its high sensitivity to harmful for human healt...
Nanostructures p-CoOx/n-SnO2 based on tin oxide nanowires have been prepared by two step CVD techniq...
Effect of particle size, concentration of structural defects and the presence of sulfite and sulfate...
The gas-sensing mechanism of an n-type semiconductor (tin dioxide) gas sensor is reviewed in this pa...
Metal oxide gas sensors have many advantages over other solid-state gas monitoring devices, includin...
The gas-sensing mechanism of an n-type semiconductor (tin dioxide) gas sensor is reviewed in this pa...
Pure and copper (Cu)-incorporated tin oxide (SnO2) pellet gas sensors with characteristics provoking...
Tin dioxide (SnO2) nanoparticles were straightforwardly synthesized using an easily scaled-up liquid...
The sensing behavior of SnO2-based thick film gas sensors in a flow system in the presence of a very...
International audienceRaman surface vibration modes have been measured for SnO2 nanocrystalline powd...
This paper presents an approach to improving the selectivity of gas sensors based on nanocrystalline...
Abstract We report the effect of the fabric of the surface microstructure on the CO gas sensing prop...
Tin dioxide (SnO2) nanoparticles were straightforwardly synthesized using an easily scaled-up liquid...
Abstract: The effect of Cu coating on the sensing properties of nano SnO2:Cu based sensors for the C...
Nano-SnO2 powder was prepared by the hydrothermal method in this paper. X-ray powder diffraction (XR...
Metal oxide-based gas sensors are widely used due to its high sensitivity to harmful for human healt...
Nanostructures p-CoOx/n-SnO2 based on tin oxide nanowires have been prepared by two step CVD techniq...
Effect of particle size, concentration of structural defects and the presence of sulfite and sulfate...
The gas-sensing mechanism of an n-type semiconductor (tin dioxide) gas sensor is reviewed in this pa...
Metal oxide gas sensors have many advantages over other solid-state gas monitoring devices, includin...
The gas-sensing mechanism of an n-type semiconductor (tin dioxide) gas sensor is reviewed in this pa...
Pure and copper (Cu)-incorporated tin oxide (SnO2) pellet gas sensors with characteristics provoking...
Tin dioxide (SnO2) nanoparticles were straightforwardly synthesized using an easily scaled-up liquid...
The sensing behavior of SnO2-based thick film gas sensors in a flow system in the presence of a very...
International audienceRaman surface vibration modes have been measured for SnO2 nanocrystalline powd...
This paper presents an approach to improving the selectivity of gas sensors based on nanocrystalline...
Abstract We report the effect of the fabric of the surface microstructure on the CO gas sensing prop...
Tin dioxide (SnO2) nanoparticles were straightforwardly synthesized using an easily scaled-up liquid...
Abstract: The effect of Cu coating on the sensing properties of nano SnO2:Cu based sensors for the C...
Nano-SnO2 powder was prepared by the hydrothermal method in this paper. X-ray powder diffraction (XR...
Metal oxide-based gas sensors are widely used due to its high sensitivity to harmful for human healt...
Nanostructures p-CoOx/n-SnO2 based on tin oxide nanowires have been prepared by two step CVD techniq...