An empirical liquid permeability-gas permeability correlation for use in aquifer properties studies

Laboratory permeability studies can contribute significantly to the quantification of aquifer heterogeneity. However, intrinsic permeabilities obtained by standard core analysis techniques using gas are different from those obtained using water. This is because gas measurements may be affected by a molecular phenomenon known as gas slippage. An empirical correlation is presented for liquid and gas permeability measurements obtained for a suite of Permo-Triassic sandstones and shales from the Sherwood Sandstone Group of northern England. Liquid permeability tests were performed using synthetic formation brines and deionized water. Gas permeability tests used nitrogen as the permeant. Liquid permeabilites, kl, ranged from 9.0 x 10-19 m2to 2.4 x 10-12m2 and gas permeabilites, kg, ranged from 1.7 x 10-17m2 to 2.6 x 10-12m2.The liquid and gas permeability data exhibit log-normal frequency distributions; the log transformed liquid and gas permeability data have means of 5.1 x 10-16m2 and 4.3 x 10-15m2respectively. A linear least-squares fit to the data has the form log10kl = 1.17log10kg + 1.51. kl/kg ratios, in the range 0.03 to 0.9, indicate that Hagen-Poiseuille type models may not provide appropriate descriptions of gas flow in the Sherwood Sandstone