Automatic verification of design rules in PCB manufacturing

Nowadays, electronics can be found in almost every available device. At the core of electronic devices there are Printed Circuit Boards (PCB). To create a suitable PCB there is the need of complying with several constraints, both concerning electrical and layout design. Thus, the design rules related to the PCB manufacturing and assembly are very important since these restrictions are fundamental to ensure the creation of a viable physical PCB. Electrical Computer Aided Design (ECAD) tools are able to automatically verify such rules, but they only consider a subset of the total required rules. The remaining rules are currently manually checked, which may increase the occurrence of errors and, consequently, increase the overall costs in designing and in the manufacturing process of a PCB. Being the design a crucial phase in the manufacturing procedure, a software system that automatically verifies all design rules and produce the corresponding assessment report is fundamental. Such software system is addressed in this paper.This work was funded by the project “iFACTORY: Novas Capacidades de Industrialização”, with reference 002814 supported by FEDER trough “Portugal2020 Programa Operacional Competitividade e Internacionalização” (COMPETE2020). This work has been supported by COMPETE: POCI-01-0145-FEDER-007043and FCT - Fundação para a Ciência e a Tecnologia within the Project Scope: UID/CEC/00319/201