This paper reports the use of the nuclear transmutation back doping technique for studying the deep Cr and Fe acceptors in InP. The authors have demonstrated the changes in the electrical characteristics and the photoconductivity spectra for the InP materials studied brought about by this shallow donor compensation technique. In InP:Cr, it has been shown that the E vb+0.95 eV level belongs to the Cr 2- lower charge state. In InP:Fe, it has been possible to confirm some of the optical transitions involving both Fe 3- and Fe 2-. In particular, this work has confirmed that the deep level E cb-0.66 eV is the ground state of Fe 2-. This investigation has also allowed the authors to estimate the Fe doping concentration in a heavily doped sample a...
We have observed a broad, room-temperature photoconductivity band, with a peak at 0.44 eV, in Fe-dop...
Fe is still the commonly used dopant to fabricate semi-insulating(SI) InP, a key material for high-s...
High temperature (> 200 degreesC) Fe ion implantation in combination with a post-implantation anneal...
The measurement of photoconductivity in samples of semi-insulating n-type Fe-doped InP are reported....
Measurements of photoconductivity and secondary excitation spectra have been used to determine the p...
A photoconductivity study has been made of nominally undoped VPE n-InP materials grown on semi-insul...
It has recently been reported that high-resistivity Fe-doped InP wafers can present very different c...
We have studied the electrical activation of the Fe2+3+ trap in Fe-implanted InP by means of capacit...
Fe and Cr doping of liquid‐phase epitaxial In0.53Ga0.47As grown at 650 °C on InP substrates have bee...
We report on the thermal evolution of the deep levels in Fe implanted and annealed InP. The position...
High temperature (> 200 degreesC) Fe implantation in InP has been proved to be a suitable method to ...
We have studied the electrical activation of the Fe2+/3+ trap in Fe implanted InP by means of capaci...
We have investigated the structural and electrical behavior of Fe centers introduced in InP by high...
Optical absorption and photoluminescence (PL) measurements were carried out in both undoped and Fe-d...
As-grown Fe-doped semi-insulating InP single crystal has been converted into n-type low-resistance m...
We have observed a broad, room-temperature photoconductivity band, with a peak at 0.44 eV, in Fe-dop...
Fe is still the commonly used dopant to fabricate semi-insulating(SI) InP, a key material for high-s...
High temperature (> 200 degreesC) Fe ion implantation in combination with a post-implantation anneal...
The measurement of photoconductivity in samples of semi-insulating n-type Fe-doped InP are reported....
Measurements of photoconductivity and secondary excitation spectra have been used to determine the p...
A photoconductivity study has been made of nominally undoped VPE n-InP materials grown on semi-insul...
It has recently been reported that high-resistivity Fe-doped InP wafers can present very different c...
We have studied the electrical activation of the Fe2+3+ trap in Fe-implanted InP by means of capacit...
Fe and Cr doping of liquid‐phase epitaxial In0.53Ga0.47As grown at 650 °C on InP substrates have bee...
We report on the thermal evolution of the deep levels in Fe implanted and annealed InP. The position...
High temperature (> 200 degreesC) Fe implantation in InP has been proved to be a suitable method to ...
We have studied the electrical activation of the Fe2+/3+ trap in Fe implanted InP by means of capaci...
We have investigated the structural and electrical behavior of Fe centers introduced in InP by high...
Optical absorption and photoluminescence (PL) measurements were carried out in both undoped and Fe-d...
As-grown Fe-doped semi-insulating InP single crystal has been converted into n-type low-resistance m...
We have observed a broad, room-temperature photoconductivity band, with a peak at 0.44 eV, in Fe-dop...
Fe is still the commonly used dopant to fabricate semi-insulating(SI) InP, a key material for high-s...
High temperature (> 200 degreesC) Fe ion implantation in combination with a post-implantation anneal...