Synthesis design of ultra-wideband bandpass filters with composite series and shunt stubs

This paper presents a direct synthesis procedure for efficient design of a class of ultra-wideband bandpass filters with composite series and shunt transmission-line stubs. The proposed single-stage bandpass prototype is formed by cascading two sets of series open-ended and shunt short-ended stubs through a multisection nonuniform transmission line. All the stubs are set with an identical electrical length, i.e., θ c, at lower cutoff frequency f c and the middle connecting line is composed of stepped-impedance transmission line with sections, and each section has an electrical length θ c. The proposed filter topology aims to construct an ultrawide bandpass filter with Chebyshev equal-ripple responses and (i + 3) in-band transmission poles. Based on the derivation of the transfer function, a synthesis approach is established and systematically described to design this type of filters according to the specifications such as lower/upper cutoff frequencies. Next, a multistage bandpass filter prototype is proposed and the synthesis design procedure is also presented. The implementation is achieved by using hybrid microstrip line and slotline sections. Compared with traditional stub filters, the proposed filters achieve higher order transmission zeros and thus provide higher selectivity. As design examples, two single-stage and one three-stage bandpass filters are designed and fabricated to confirm the theoretical predictions. © 2009 IEEE.link_to_subscribed_fulltex