The paper reports that HfTiO dielectric is deposited by reactive co-sputtering of Hf and Ti targets in an Ar/O 2 ambience, followed by an annealing in different gas ambiences of N 2, NO and NH 3 at 600°C for 2 min. Capacitance-voltage and gate-leakage properties are characterized and compared. The results indicate that the NO-annealed sample exhibits the lowest interface-state and dielectric-charge densities and best device reliability. This is attributed to the fact that nitridation can create strong Si≡≡N bonds to passivate dangling Si bonds and replace strained Si-O bonds, thus the sample forms a hardened dielectric/Si interface with high reliability. © 2006 Chin. Phys. Soc. and IOP Publishing Ltd.link_to_subscribed_fulltex
Reactive cosputtering is employed to prepare high-permittivity HfTiO gate dielectric on n-Ge substra...
[[abstract]]High dielectric constant (high-k) materials, as a replacement for conventional gate diel...
High-K gate dielectric will be needed when MOS devices are scaled down to the sub-100 nm level. HfO2...
HfTiN film was deposited by co-reactive sputtering and then was annealed in different gas ambients a...
In this paper, Si-MOS capacitors with HfTiO/SiON stack gate dielectric were fabricated by using Si-s...
HfTiO gate dielectric is first deposited on Si wafer through co-sputtering method. The influences of...
Trichloroethylene (TCE) pretreatment of Si surface prior to HfO 2 deposition is employed to fabricat...
Thin HfTiO gate dielectric is deposited by reactive co-sputtering method followed by wet or dry N2 a...
Hafnium oxide (HfO2) was investigated as an alternative possible gate dielectric. MOS capacitor usin...
Proceedings of the IEEE International Conference of Electron Devices and Solid-State Circuits, 2009,...
Electrical properties of MOS capacitors using MOCVD HfO2 as gate dielectric have been investigated. ...
The impact of sputtering ambient on the properties of HfLaO film is studied by varying the ratio of ...
Metal-oxide-semiconductor (MOS) capacitor with HfTiONHfSiON stack structure as high- k gate dielectr...
High k dielectrics, such as Al2O3, has attracted increasing research attention for its use as the ga...
[[abstract]]Interaction of HfxTayN metal gate with SiO2 and HfOxNy gate dielectrics has been extensi...
Reactive cosputtering is employed to prepare high-permittivity HfTiO gate dielectric on n-Ge substra...
[[abstract]]High dielectric constant (high-k) materials, as a replacement for conventional gate diel...
High-K gate dielectric will be needed when MOS devices are scaled down to the sub-100 nm level. HfO2...
HfTiN film was deposited by co-reactive sputtering and then was annealed in different gas ambients a...
In this paper, Si-MOS capacitors with HfTiO/SiON stack gate dielectric were fabricated by using Si-s...
HfTiO gate dielectric is first deposited on Si wafer through co-sputtering method. The influences of...
Trichloroethylene (TCE) pretreatment of Si surface prior to HfO 2 deposition is employed to fabricat...
Thin HfTiO gate dielectric is deposited by reactive co-sputtering method followed by wet or dry N2 a...
Hafnium oxide (HfO2) was investigated as an alternative possible gate dielectric. MOS capacitor usin...
Proceedings of the IEEE International Conference of Electron Devices and Solid-State Circuits, 2009,...
Electrical properties of MOS capacitors using MOCVD HfO2 as gate dielectric have been investigated. ...
The impact of sputtering ambient on the properties of HfLaO film is studied by varying the ratio of ...
Metal-oxide-semiconductor (MOS) capacitor with HfTiONHfSiON stack structure as high- k gate dielectr...
High k dielectrics, such as Al2O3, has attracted increasing research attention for its use as the ga...
[[abstract]]Interaction of HfxTayN metal gate with SiO2 and HfOxNy gate dielectrics has been extensi...
Reactive cosputtering is employed to prepare high-permittivity HfTiO gate dielectric on n-Ge substra...
[[abstract]]High dielectric constant (high-k) materials, as a replacement for conventional gate diel...
High-K gate dielectric will be needed when MOS devices are scaled down to the sub-100 nm level. HfO2...