Improvement of the performances of tubular solid oxide fuel cells by optimizing co-sintering temperature of the NiO/YSZ anode-YSZ electrolyte double layers

The effects of co-sintering temperature on anode microstructure, electrolyte film microstructure, and final cell performance of tubular solid oxide fuel cells (SOFCs) were fully studied. The co-sintering of the NiO/YSZ anode-YSZ electrolyte double layers at temperature ranging from 1350 to 1400 °C for 5 h was carried out. Porosity and electrical conductivity were measured to examine the anodes microstructure, and the electrolyte films microstructure were characterized by scanning electronic microscope (SEM). A higher open current voltage (OCV) value of 0.99 V was achieved by co-sintering the cell at 1400 °C indicating denser electrolyte film, while the maximum power density of the cell co-sintered at 1380 °C was achieved with 322 mW cm-2 at 800 °C, which was higher than that (241.3 mW cm-2) of the cell co-sintered at 1400 °C because of better anode microstructure. © 2007 Elsevier B.V. All rights reserved.link_to_subscribed_fulltex