In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number post-stall flows, periodic injection of momentum is considered along the trailing edge in this numerical study. The purpose of actuation is not to reattach the flow but to change the dynamics of the wake vortices such that the resulting lift force is increased. Periodic forcing is observed to be effective in increasing lift for various aspect ratios and angles of attack, achieving a similar lift enhancement attained by steady forcing with less momentum input. Through the investigation on the influence of the actuation frequency, it is also found that there exists a frequency at which the flow locks on to a time-periodic high-lift stat...
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/90640/1/AIAA-54000-610.pd
Numerical simulations are performed to study the influence of spanwise oscillations on the three-dim...
The objective of this study is to employ feedback control to maximize time-average lift on a low-asp...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
The objective of this study is to employ feedback control to maximize time-average lift on a low-asp...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
Flow control is applied to a three-dimensional post-stall flow around a rectangular low-aspect-ratio...
Open- and closed-loop control of vortex shedding in two-dimensional flow over a flat plate at high a...
In generating the lift on a wing, the static stall is a severe barrier. As the angle of attack, alph...
Force and particle image velocimetry measurements were conducted on a NACA 0012 airfoil undergoing s...
Optimal control theory is combined with the numerical simulation of an incompressible viscous flow t...
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/90640/1/AIAA-54000-610.pd
Numerical simulations are performed to study the influence of spanwise oscillations on the three-dim...
The objective of this study is to employ feedback control to maximize time-average lift on a low-asp...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
The objective of this study is to employ feedback control to maximize time-average lift on a low-asp...
We numerically investigate the application of steady blowing to three-dimensional stalled flows arou...
Flow control is applied to a three-dimensional post-stall flow around a rectangular low-aspect-ratio...
Open- and closed-loop control of vortex shedding in two-dimensional flow over a flat plate at high a...
In generating the lift on a wing, the static stall is a severe barrier. As the angle of attack, alph...
Force and particle image velocimetry measurements were conducted on a NACA 0012 airfoil undergoing s...
Optimal control theory is combined with the numerical simulation of an incompressible viscous flow t...
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/90640/1/AIAA-54000-610.pd
Numerical simulations are performed to study the influence of spanwise oscillations on the three-dim...
The objective of this study is to employ feedback control to maximize time-average lift on a low-asp...