Electro-catalytic oxidation of phenol on several metal-oxide electrodes in aqueous solution

Elecrtochemical degradation of phenol was evaluated at five typical anodes for mineralization to carbon dioxide or for being a pre-treatment method in toxic aromatic compounds. Three kinds of RuO2-base electrodes were prepared by thermal deposition, which were coated by the oxides of Ru or by Ru, Sn and Sb or by Ru, Sn, Sb and Gd on Ti metal surface, respectively. Another electrode Ti/ PbO2 was prepared by electro-deposition method with PbO2 coated on Ti. A Pt electrode was chosen for comparison. Characteristics of the typical five electrodes were investigated by cyclic voltammetry, SEM and its degradation ability for phenol. Performance for phenol degradation of the three RuO2 electrodes lie in: Ti/Sb-Sn-RuO2-Gd> Ti/Sb-Sn-RuO2> Ti/RuO2 and the electrode with β-PbO2 coating was superior to RuO2-based electrodes and Pt electrode. Aromatic ring opening take place at all researched electrodes and it is supposed that electrolysis run stop at different intermediates, such as benzoquinone, maleic acid, etc. Under the present experimental conditions, whole mineralization to CO2 takes place only in the β-PbO2 anode. A pathway of electrochemical degradation of phenol was suggested based on the experimental analysis. © 2003 Elsevier Science Ltd. All rights reserved.link_to_subscribed_fulltex