Add to ORKGThe enhancement of the 1 day mortar strength with triisopropanolamine (mark A), isopropanolamin derivatives (mark B) and tri-ethanolamine (mark C) was studied. Isothermal calorimetry was tested an influence of two types of alkanolamine. Mark C was highest 1 day strength ratio in all alkanolamine. Ordinary Portland cement blending with fly ash was tested in mortar with Mark C. When used 15% fly ash in cement, Mark C added at a rate of 0.04% by powder and 25% fly ash in cement, Mark C added at a rate of 0.06% by powder
An attempt has been taken to find out the sustainable use of fly ash which was used as an admixture ...
A study examining air-entrainment in fly ash concretes combined with different Portland cements (PCs...
In the paper, the authors present the results of tests concerning traditional cement mortars with th...
The enhancement of mortar strength using flyash with triisopropanolamine (mark A) and three types of...
This is an experimental study which explores the physical, mechanical, and economic factors involved...
WOS:000424883900001This is an experimental study which explores the physical, mechanical, and econom...
Two types of flyash and two types of additives were investigated at the environmental temperature 10...
DergiPark: 169849klujesChemical admixtures are used in concrete for various purposes such as water r...
AbstractThe cement companies have found in natural and artificial pozzolans a very good option for p...
Mineral additives are extensively applied as cement replacements in building concretes and mortars. ...
AbstractThe effectiveness of cement additives with and without chloride on the fluidity and the stre...
Mitigation of problems in high-volume fly ash (HVFA) paste mixtures was explored using powder additi...
This work presents a study on the influence of thermalâ€electrical fly ash on the cement paste hydra...
This paper reports the results of an experimental investigation carried out to study the effects of ...
This research is designed to determine the effect of the mechanically activated fly ash on fresh con...
An attempt has been taken to find out the sustainable use of fly ash which was used as an admixture ...
A study examining air-entrainment in fly ash concretes combined with different Portland cements (PCs...
In the paper, the authors present the results of tests concerning traditional cement mortars with th...
The enhancement of mortar strength using flyash with triisopropanolamine (mark A) and three types of...
This is an experimental study which explores the physical, mechanical, and economic factors involved...
WOS:000424883900001This is an experimental study which explores the physical, mechanical, and econom...
Two types of flyash and two types of additives were investigated at the environmental temperature 10...
DergiPark: 169849klujesChemical admixtures are used in concrete for various purposes such as water r...
AbstractThe cement companies have found in natural and artificial pozzolans a very good option for p...
Mineral additives are extensively applied as cement replacements in building concretes and mortars. ...
AbstractThe effectiveness of cement additives with and without chloride on the fluidity and the stre...
Mitigation of problems in high-volume fly ash (HVFA) paste mixtures was explored using powder additi...
This work presents a study on the influence of thermalâ€electrical fly ash on the cement paste hydra...
This paper reports the results of an experimental investigation carried out to study the effects of ...
This research is designed to determine the effect of the mechanically activated fly ash on fresh con...
An attempt has been taken to find out the sustainable use of fly ash which was used as an admixture ...
A study examining air-entrainment in fly ash concretes combined with different Portland cements (PCs...
In the paper, the authors present the results of tests concerning traditional cement mortars with th...