The role of the operating parameters of SBR systems on the SMP production and on membrane fouling reduction

[EN] In this work, six identical laboratory SBRs treating simulated wastewater were operated in parallel studying the effect of three food-to-microorganisms ratio (F/M ratio; 0.20, 0.35 and 0.50 kg COD¿kg MLSS-1¿d-1), two hydraulic retention times (HRT; 24 and 16 h) and two values of number of cycles per day (3 and 6). Influence of these operational parameters on the SMPs production and reactor performance, were studied. Results indicated that the highest F/M ratio, HRT and cycles/day produced 72.7% more of SMP. In a second experimental series, biological process yielding the maximal and the minimal SMPs production were replicated and both mixed liquors (ML) and treated effluents were ultrafiltrated. The flux decay in the conditions of minimum and maximum SMPs production were 52% and 72%, when the SBRs effluents were ultrafiltrated while no significant differences in the ultrafiltration of ML were found. In terms of permeability recovery, this was lower for the case of the ML (73% and 49% of initial permeability recovered for effluent and ML ultrafiltration, respectively).This work was supported by the Spanish Ministerio de Economia y Competitividad (CTM2014-54546-P).Ferrer-Polonio, E.; White, K.; Mendoza Roca, JA.; Bes-Piá, M. (2018). The role of the operating parameters of SBR systems on the SMP production and on membrane fouling reduction. Journal of Environmental Management. 228:205-212. https://doi.org/10.1016/j.jenvman.2018.09.036S20521222