[EN] Visualization of single-hole nozzles into quiescent ambient has been used extensively in the literature to characterize spray mixing and combustion. However in-cylinder flow may have some meaningful impact on the spray evolution. In the present work, visualization of direct diesel injection spray under both non-reacting and reacting operating conditions was conducted in an optically accessible two-stroke engine equipped with a single-hole injector. Two different high-speed imaging techniques, Schlieren and UV-Light Absorption, were applied here to quantify vapor penetration for non-reacting spray. Meanwhile, Mie-scattering was used to measure the liquid length. As for reacting conditions, Schlieren and OH* chemiluminescence were simult...
Global growth in the sales of light-duty diesel-powered vehicles is effectively driven by diesel eng...
Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended...
A lot of effort has been put in the past years into the understanding of the delivery and developmen...
The effects of in-cylinder and injection pressures on the formation and combustion of diesel sprays ...
In this research, two Engine Combustion Network (ECN) mono-orifice nozzles, referred to as Spray C a...
The investigations described were initiated in order to provide information and understanding on the...
Schlieren imaging has helped deeply characterize the behavior of Diesel spray when injected into an ...
In this research, two Engine Combustion Network (ECN) mono-orifice nozzles, referred to as Spray C a...
Methods for reducing engine-out emissions are urgently needed to mitigate climate change and air pol...
Extensive studies have addressed diesel sprays under non-vaporizing, vaporizing and combusting condi...
The effects of fuel type and in-cylinder flow on spray formation from a multi-hole injector were stu...
The second part of this experimental analysis, presented in this paper, seeks to go deep on the char...
The second part of this experimental analysis, presented in this paper, seeks to go deep on the char...
Development and mixing of Diesel sprays are long known to be key factors for combustion and pollutan...
An attempt to further understand the processes of auto-ignition, combustion and ultimately emission ...
Global growth in the sales of light-duty diesel-powered vehicles is effectively driven by diesel eng...
Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended...
A lot of effort has been put in the past years into the understanding of the delivery and developmen...
The effects of in-cylinder and injection pressures on the formation and combustion of diesel sprays ...
In this research, two Engine Combustion Network (ECN) mono-orifice nozzles, referred to as Spray C a...
The investigations described were initiated in order to provide information and understanding on the...
Schlieren imaging has helped deeply characterize the behavior of Diesel spray when injected into an ...
In this research, two Engine Combustion Network (ECN) mono-orifice nozzles, referred to as Spray C a...
Methods for reducing engine-out emissions are urgently needed to mitigate climate change and air pol...
Extensive studies have addressed diesel sprays under non-vaporizing, vaporizing and combusting condi...
The effects of fuel type and in-cylinder flow on spray formation from a multi-hole injector were stu...
The second part of this experimental analysis, presented in this paper, seeks to go deep on the char...
The second part of this experimental analysis, presented in this paper, seeks to go deep on the char...
Development and mixing of Diesel sprays are long known to be key factors for combustion and pollutan...
An attempt to further understand the processes of auto-ignition, combustion and ultimately emission ...
Global growth in the sales of light-duty diesel-powered vehicles is effectively driven by diesel eng...
Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended...
A lot of effort has been put in the past years into the understanding of the delivery and developmen...