Experimental investigation on camera calibration for 3D photogrammetric scanning of micro-features for micrometric resolution

[EN] Recently, it has been demonstrated that photogrammetry can be used for the measurement of small objects with micro-features, with good results and lower cost, compared to other established techniques such as interferometry, conoscopic holography, and 3D microscopy. Calibration is a critical step in photogrammetry and the classical pinhole camera model has been tested for magnifications lower than 2×. At higher magnification levels, because of the reduction of the depth of field (DOF), images can lead to calibration data with low reprojection errors. However, this could lead to bad results in the 3D reconstruction. With the aim of verifying the possibility of applying the camera model to magnifications higher than 2×, experiments have been conducted using reflex cameras with 60 mm macro lens, equipped with the combination of three extension tubes, corresponding to 2.06, 2.23, and 2.4 magnification levels, respectively. Experiments consisted of repeating calibration five times for each configuration and testing each calibration model, measuring two artifacts with different geometrical complexity. The calibration results have shown good repeatability of a subset of the internal calibration parameters. Despite the differences in the calibration reprojection error (RE), the quality of the photogrammetric 3D models retrieved was stable and satisfying. The experiment demonstrated the possibilities of the photogrammetric system presented, equipped to very high magnification levels, to retrieve accurate 3D reconstruction of micro-features with uncertainties of few micrometers, comparable with industry s expensive state-of-the-art technologies.Percoco, G.; Guerra, MG.; Sánchez Salmerón, AJ.; Galantucci, LM. (2017). Experimental investigation on camera calibration for 3D photogrammetric scanning of micro-features for micrometric resolution. The International Journal of Advanced Manufacturing Technology. 91(9-12):2935-2947. https://doi.org/10.1007/s00170-016-9949-6S29352947919-1