Modelling biological and chemically induced precipitation of calcium phosphate in enhanced biological phosphorus removal systems

The biologically induced precipitation processes can be important in wastewater treatment, in particular treating raw wastewater with high calcium concentration combined with Enhanced Biological Phosphorus Removal. Currently, there is little information and experience in modelling jointly biological and chemical processes. This paper presents a calcium phosphate precipitation model and its inclusion in the Activated Sludge Model No 2d (ASM2d). The proposed precipitation model considers that aqueous phase reactions quickly achieve the chemical equilibrium and that aqueous-solid change is kinetically governed. The model was calibrated using data from four experiments in a Sequencing Batch Reactor (SBR) operated for EBPR and finally validated with two experiments. The precipitation model proposed was able to reproduce the dynamics of amorphous calcium phosphate (ACP) formation and later crystallization to hydroxyapatite (HAP) under different scenarios. The model successfully characterised the EBPR performance of the SBR, including the biological, physical and chemical processes. © 2011 Elsevier Ltd.This research work has been supported by the Spanish Research Foundation (MCYT, project PPQ2002-04043-C02-01), which is gratefully acknowledged.Barat Baviera, R.; Montoya Martínez, T.; Seco Torrecillas, A.; Ferrer, J. (2011). Modelling biological and chemically induced precipitation of calcium phosphate in enhanced biological phosphorus removal systems. Water Research. 45(12):3744-3752. doi:10.1016/j.watres.2011.04.028S37443752451