Thin films of SrTiO3 were deposited by multi-ion-beam reactive sputtering technique using SrO and Ti-metal targets. The dielectric behavior of the films deposited on Pt-coated Si substrates showed thickness dependence. A dielectric constant of 219 at 100 KHz was found for 1.2 µm thick films. A charge storage density of about 15 fC/µ m2 and leakage current density of 106 µ A/cm2 at an electric field of 0.17 MV/cm were obtained for 0.3 µm films. The probable interface layers present between film and silicon substrate, in the case of metal-insulator-silicon configuration, appear to influence the electrical behavior. Preliminary analysis showed that the conduction of the films in high field region was bulk-limited Poole-Fren...
Polycrystalline strontium titanate (SrTiO3) films were prepared by a pulsed laser deposition techniq...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...
Thin films of SrTiO3 were deposited by multi-ion-beam reactive sputtering technique using SrO and Ti...
Strontium titanate thin films were deposited by electron-cyclotron-resonance plasma-assisted radio-f...
Polycrystalline SrTiO3 thin films having perovskite structure were prepared by the metallo-organ...
The dielectric permittivity, dielectric quality factor (inverse dielectric loss), and lattice parame...
Strontium titanate (SrTiO3) thin films were deposited on cleaned p-type (100) oriented silicon subst...
Polycrystalline SrTiO3 films were prepared by pulsed excimer laser ablation on Si and Pt coated Si s...
Polycrystalline SrTiO3 films were prepared by pulsed excimer laser ablation on Si and Pt coated Si s...
Polycrystalline SrTiO3 thin films having a cubic perovskite structure were prepared at different tem...
Thin films of SrTiO3 (STO) were formed on p-type Si(100) substrates using rf magnetron sputtering at...
Thin films of SrTiO3 were deposited on platinum coated silicon and bare silicon by excimer laser (24...
Polycrystalline strontium titanate (SrTiO3) films were prepared by a pulsed laser deposition techniq...
This thesis presents the effect of certain process conditions in the overall performance of SrTiO3 ...
Polycrystalline strontium titanate (SrTiO3) films were prepared by a pulsed laser deposition techniq...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...
Thin films of SrTiO3 were deposited by multi-ion-beam reactive sputtering technique using SrO and Ti...
Strontium titanate thin films were deposited by electron-cyclotron-resonance plasma-assisted radio-f...
Polycrystalline SrTiO3 thin films having perovskite structure were prepared by the metallo-organ...
The dielectric permittivity, dielectric quality factor (inverse dielectric loss), and lattice parame...
Strontium titanate (SrTiO3) thin films were deposited on cleaned p-type (100) oriented silicon subst...
Polycrystalline SrTiO3 films were prepared by pulsed excimer laser ablation on Si and Pt coated Si s...
Polycrystalline SrTiO3 films were prepared by pulsed excimer laser ablation on Si and Pt coated Si s...
Polycrystalline SrTiO3 thin films having a cubic perovskite structure were prepared at different tem...
Thin films of SrTiO3 (STO) were formed on p-type Si(100) substrates using rf magnetron sputtering at...
Thin films of SrTiO3 were deposited on platinum coated silicon and bare silicon by excimer laser (24...
Polycrystalline strontium titanate (SrTiO3) films were prepared by a pulsed laser deposition techniq...
This thesis presents the effect of certain process conditions in the overall performance of SrTiO3 ...
Polycrystalline strontium titanate (SrTiO3) films were prepared by a pulsed laser deposition techniq...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...
SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto...