Amylopectin-rich starch plasticized with glycerol for polymer electrolyte application

This paper describes the preparation and characterization of a solid polymer electrolyte based on amylopectin-rich starch plasticized with glycerol. The samples were characterized through ionic conductivity (sigma) measurements, scanning electron microscopy, thermal analysis, and spectroscopy in the UV-Vis-NIR region. The results showed that the highest sigma (1.1 x 10(-4) Scm(-1) at 30 degrees C) was obtained for the sample with n = [O]/[Li] = 6.5 ratio. In addition, the samples plasticized with 30-35 wt.% of glycerol presented high ionic conductivity, transparency and conduction stability. The ionic conductivity measurements as a function of lithium salt contents showed a maximum for n=6.5. The ionic conductivity as a function of time for amylopectin-rich starch plasticized with 30 wt.% of glycerol and containing [O]/[Li] = 10 showed conduction stability over 6 months (sigma similar to 3.01 x 10(-5) S cm(-1)). (C) 2010 Elsevier B.V. All rights reserved.Fundacao Araucaria de Apoio ao Desenvolvimento Cientifico e Tecnologico do Parana[9506]Fundacao Araucaria de Apoio ao Desenvolvimento Cientifico e Tecnologico do ParanaConselho Nacional de Desenvolvimento Cientifico e Tecnologico-CNPq[556542/2005-3]Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)UNIPAR (Universidade Paranaense)[274/2004]UNIPAR (Universidade Paranaense)FAPESPFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP