Four aluminas were used as Supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between Support and modifier. The Supports were impregnated with different concentrations Of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to identification of crystalline zirconia in different concentrations from each support used. Using a simple geometric model the maximum amount Of Surface modifier Oxide required for the complete coating of a support with a layer of unit cells was estimated. According to this estimate, only the support should be identified below the limit proposed and crysta...
AbstractZirconia is a widely used multifunctional material. Its interesting properties, such as high...
The aim of this study is to produce partially stabilized zirconia with MgO and to investigate effect...
The chemical resistance of ceramic glazes susceptible to it, and more specifically the glazes formul...
Four aluminas were used as Supports for impregnation with a zirconium oxide with the aim to achieve ...
In this study a model that makes possible to foresee the limit of modifier oxide of surface that res...
Silica- and alumina-supported zirconia samples have been prepared by impregnation of the supports wi...
Este trabalho apresenta a síntese e caracterização de um suporte catalítico de -Alumina com ...
The characteristics of Al2O3 , ZrO2 and three binary mixtures of ZrO2 -Al2O3 were studied by determi...
A single-phase monoclinic zirconia (the thermodynamically stable modification up to a temperature of...
[[abstract]]Zirconia (ZrO2) nanoparticles were synthesized by hydrolysis and condensation of zirconi...
Due to theoutstanding mechanical properties and excellent biocompatibilityof Zirconia(ZrO2), ...
Al$_2$O$_3$ and Al$_2$O$_3$-ZrO$_2$ coatings were deposited on stainless steel using atmospheric pla...
The thermostability of ZrO2 can be improved by dispersing a layer of an active component onto its su...
Zirconia ceramic restoration (ZCR) has a higher fracture incidence rate than metal ceramic restorati...
Among bioceramics, zirconia (ZrO2) and alumina (Al2O3) possess exceptional mechanical properties sui...
AbstractZirconia is a widely used multifunctional material. Its interesting properties, such as high...
The aim of this study is to produce partially stabilized zirconia with MgO and to investigate effect...
The chemical resistance of ceramic glazes susceptible to it, and more specifically the glazes formul...
Four aluminas were used as Supports for impregnation with a zirconium oxide with the aim to achieve ...
In this study a model that makes possible to foresee the limit of modifier oxide of surface that res...
Silica- and alumina-supported zirconia samples have been prepared by impregnation of the supports wi...
Este trabalho apresenta a síntese e caracterização de um suporte catalítico de -Alumina com ...
The characteristics of Al2O3 , ZrO2 and three binary mixtures of ZrO2 -Al2O3 were studied by determi...
A single-phase monoclinic zirconia (the thermodynamically stable modification up to a temperature of...
[[abstract]]Zirconia (ZrO2) nanoparticles were synthesized by hydrolysis and condensation of zirconi...
Due to theoutstanding mechanical properties and excellent biocompatibilityof Zirconia(ZrO2), ...
Al$_2$O$_3$ and Al$_2$O$_3$-ZrO$_2$ coatings were deposited on stainless steel using atmospheric pla...
The thermostability of ZrO2 can be improved by dispersing a layer of an active component onto its su...
Zirconia ceramic restoration (ZCR) has a higher fracture incidence rate than metal ceramic restorati...
Among bioceramics, zirconia (ZrO2) and alumina (Al2O3) possess exceptional mechanical properties sui...
AbstractZirconia is a widely used multifunctional material. Its interesting properties, such as high...
The aim of this study is to produce partially stabilized zirconia with MgO and to investigate effect...
The chemical resistance of ceramic glazes susceptible to it, and more specifically the glazes formul...